Structural Finite Element Model Updating Using Vibration Tests and Modal Analysis for NPL footbridge – SHM demonstrator
نویسندگان
چکیده
منابع مشابه
investigation of apple vibration characteristics using finite element modal analysis
the most important quality indicator of fruits is the flesh firmness which is well correlated to their young’s modulus. in this research variation of vibration characteristics (shape modes, natural frequency) of apple due to change of material characteristics (density, young's models, poisson ratio) and apple volume was investigated using finite element simulation. an image processing technique...
متن کاملA NEW APPROACH BASED ON FINITE ELEMENT MODEL UPDATING FOR STRUCTURAL DAMAGE IDENTIFICATION
In this study, the finite element model updating was simulated by reducing the stiffness of the members. Due to lack of access to the experimental results, the data obtained from an analytical model were used in the proposed structural damage scenarios. The updating parameters for the studied structures were defined as a reduction coefficient applied to the stiffness of the members. Parameter v...
متن کاملFinite element model updating of a geared rotor system using particle swarm optimization for condition monitoring
In this paper, condition monitoring of a geared rotor system using finite element (FE) model updating and particle swarm optimization (PSO) method is onsidered. For this purpose, employing experimental data from the geared rotor system, an updated FE model is obtained. The geared rotor system under study consists of two shafts, four bearings, and two gears. To get the experimental data, iezoel...
متن کاملEffects of Changing Ambient Temperature on Finite Element Model Updating of the Dowling Hall Footbridge
In this paper, effects of changing ambient temperatures on finite element (FE) model updating of the Dowling Hall Footbridge are investigated. The Dowling Hall Footbridge is located on the Tufts University campus in Medford, Massachusetts. The footbridge is equipped with a continuous monitoring system that records vibration and temperature of the bridge once an hour or when triggered by large v...
متن کاملFinite element model updating of a truss model using incomplete modal data
This paper presents an application of a two-step finite element model updating methodology to a 3D truss bridge model, with the inertial moment and elastic modulus as variables. First, the sensitivity of the change in modal parameters to variations in the physical parameters were analyzed. Based on these sensitivity analyses, the parameters that can be updated were determined. Next, the optimiz...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2011
ISSN: 1742-6596
DOI: 10.1088/1742-6596/305/1/012105