Structural Condition Monitoring by Cumulative Harmonic Analysis of Random Vibration

Wheelset Condition Monitoring based on pass-by vibration signals

Apart from regular wheel wear such as decreasing wheel diameters and reduced flange thicknesses and heights, wheel flats (WF) and oval wheels (or OOR, Out-Of-Roundness) are the most common wheelset problems for railway vehicles. Within the FP7 Research Project “Saferail”, APT has developed an innovative wheelset monitoring system so-called “Wheel flat and Out of Roundness Monitoring (WORM) syst...

Machine-Condition Monitoring using Vibration Analysis

Wheelset Condition Monitoring Based on Pass-by Vibration Signals

Apart from regular wheel wear such as decreasing wheel diameters and reduced flange thicknesses and heights, wheel flats (WF) and oval wheels (or OOR, Out-Of-Roundness) are the most common wheelset problems for railway vehicles. Within the FP7 Research Project “Saferail”, APT has developed an innovative wheelset monitoring system so-called “Wheel flat and Out of Roundness Monitoring (WORM) syst...

Bridge Structural Condition Assessment Based on Vibration and Traffic Monitoring

A stochastic model of traffic excitation on bridges is developed assuming that the arrival of vehicles traversing a bridge modeled as an elastic beam follows a Poisson process, and that the contact force of a vehicle on the bridge deck can be converted to equivalent dynamic loads at the nodes of the beam elements. The parameters in this model, such as the Poisson arrival rate and the stochastic...

Health Monitoring of Welded Steel Pipes by Vibration Analysis

In the present work, structure health monitoring (SHM) of welded steel pipes was used to diagnosis their state via vibration based damage detection techniques. The dynamic quantities such as Frequency Response Functions (FRFs), mode shapes and modal parameters from structural vibration to detect damage were measured, set on linear averaging mode, with a maximum frequency of analysis of 3.2 kHz....