Structural Characterization of Cure Bio-based Phenol Formaldehyde Wood Adhesive
نویسندگان
چکیده
منابع مشابه
Synthesis and Cure Kinetics of Liquefied Wood/Phenol/ Formaldehyde Resins
Wood liquefaction was conducted at a 2/1 phenol/wood ratio in two different reactors: (1) an atmospheric three-necked flask reactor and (2) a sealed Parr reactor. The liquefied wood mixture (liquefied wood, unreacted phenol, and wood residue) was further condensed with formaldehyde under acidic conditions to synthesize two novolac-type liquefied wood/phenol/formaldehyde (LWPF) resins: LWPF1 (th...
متن کاملDevelopment and characterization of groundnut shell lignin modified phenol formaldehyde wood adhesive
Lignin modified phenol formaldehyde wood adhesives have been prepared by replacing phenol with the groundnut shell lignin (GNSL) at varying weight percentages. The optimization of weight percent incorporation of GNSL was carried out in respect to mechanical properties. It was found that a maximum of up to 50 wt.% of phenol in the phenol formaldehyde (PF) adhesive can be substituted by GNSL to o...
متن کاملPreparation and Characterization of a Phenol-formaldehyde Resin Adhesive Obtained From Bio-ethanol Production Residue
Phenol formaldehyde (PF) resins are widely used as wood adhesives in the industrial production of exterior-grade plywood panels, oriented strand board panels and particleboards due to their superior performance including high bonding strength, heat resistance, excellent water resistance and chemical stability1. However, phenol, one raw material for the synthesis of PF resins, is a petroleum-bas...
متن کاملWater-resistant Whey Protein Based Wood Adhesive Modified by Post-treated Phenol-formaldehyde Oligomers (pfo)
With the attempt to develop an environmentally safe whey protein-based adhesive with good water resistance, a low-molecular-weight PFO was used as a modifier, and the effects of scavengers on the formaldehyde emission and bond properties were investigated. Plywood evaluation and HPLC analysis indicated that the PFO synthesized with a low content of sodium hydroxide as a catalyst (NaOH/phenol mo...
متن کاملSynthesis of Humin-Phenol-Formaldehyde Adhesive
Humins are low-value-added byproducts from the biomass acid hydrolysis process. In the present work, humins were first employed as a phenol replacement for synthesis of modified phenol-formaldehyde adhesives through a two-step process. In this process, humins were first utilized to obtain alkaline soluble products, mainly consisting of phenolics, through a hydrothermal process. The obtained alk...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Asian Journal of Chemical Sciences
سال: 2020
ISSN: 2456-7795
DOI: 10.9734/ajocs/2020/v7i319021