Structural Characterization Multi Walled Carbon Nanotube Films on Cu
نویسندگان
چکیده
Bakır/bakır oksit/karbon nanotüp (Cu/CuO/CNT) kompozit ince filmler, elektroforetik biriktirme (EPD) yöntemine benzer şekilde hazırlanmıştır. Nanotüp SEM, EDAX, XPS, FTIR, Raman ile karakterize edilmiş ve filmlerin mikro yapısının, işlemde kullanılan çözücü, büyüme gerilimi tavlanmış sıcaklık bileşimi tarafından büyük ölçüde etkilendiği bulunmuştur. Kompozit yapılarda farklı tuzlu deiyonize su (KNO3, KCl, FeCl2) kullanılmakta ancak istenilen sonuç alınamamıştır. Bakır yüzeyinde daha kısa sürede fazla CNT birikmesi nedeniyle asetonla en iyi sonuçlar elde edilmiştir. Aseton/CNT solüsyonunda üretilen oksit miktarının az olduğu görülmektedir.
منابع مشابه
The Effects of Functionalized Multi-walled Carbon Nanotube on Mechanical Properties of Multi-walled Carbon Nanotube/Epoxy Composites
The mechanical properties of the multi-walled carbon nanotube (MWCNT)/epoxy composites affected by carboxyl and amino functionalized MWCNT are investigated. Tensile tests of the specimens were carried out to obtain mechanical properties of MWCNT/epoxy composites for various weight-percents (wt %) of MWCNTs. In order to properly predict the mechanical properties of MWCNT reinforced epoxy composi...
متن کاملLinkage of doxycycline onto functionalized multi-walled carbon nanotube and morphological characterization
In this paper functionalized multiwall carbon nanotubes (FMWCNT) were modified using doxycycline, containing reactable nitrogen, which can attach chemically to functionalized MWCNT. The synthesized nano compounds were characterized by Fourier transform infrared spectroscopy (FT-IR) and Raman spectroscopy. These spectrums proved the existence of nitrogen atoms of amide functional groups. The mor...
متن کاملEffects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties
In this paper, experimental and Finite Element Methods have been used to determine mechanical properties of nanocomposites. Standard tensile and compression samples with 0.0, 0.15, 0.25, 0.35, 0.45, and 0.55 weight fraction of Multi-Walled Carbon Nanotube (MWCNT) were prepared and tested. Nanotube weight fraction was varied to investigate the effects of nanotube weight fraction on nanocomposite...
متن کاملLinkage of doxycycline onto functionalized multi-walled carbon nanotube and morphological characterization
In this paper functionalized multiwall carbon nanotubes (FMWCNT) were modified using doxycycline, containing reactable nitrogen, which can attach chemically to functionalized MWCNT. The synthesized nano compounds were characterized by Fourier transform infrared spectroscopy (FT-IR) and Raman spectroscopy. These spectrums proved the existence of nitrogen atoms of amide functional groups. The mor...
متن کاملFabrication and characterization of thin films of single-walled carbon nanotube bundles on flexible plastic substrates.
A convenient method to obtain patterns of films of single-walled carbon nanotubes (SWNT) bundles on flexible plastic is described. Using the Line Patterning method SWNT films of thickness ranging from approximately 300-1500 nm can be obtained from aqueous surfactant-supported dispersions of chemically purified SWNT bundles synthesized by the pulsed-laser ablation method. These films are strongl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Erzincan University Journal of Science and Technology
سال: 2021
ISSN: ['1307-9085', '2149-4584']
DOI: https://doi.org/10.18185/erzifbed.916241