Structural and electrical characterization of La3+ substituted PMS-PZT (Zr/Ti:60/40) ceramics

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Structural characterization and biological fluid interaction of Sol-Gel-derived Mg-substituted biphasic calcium phosphate ceramics.

Sol-Gel chemistry has been used to prepare undoped and Mg-substituted biphasic calcium phosphate (BCP) ceramics composed of hydroxyapatite (HAp) and whitlockite (beta-TCP) phases. Different series of samples have been synthesized with different Mg-doping levels (from 0 to 5 atomic % of Ca atoms substituted) and different temperatures of calcination (from 500 to 1100 degrees C). All of the powde...

متن کامل

Compatibility of RuO2 electrodes with PZT ceramics

Because of its high electrical conductivity and good diffusion barrier properties ruthenium dioxide (RuO2) is a good electrode material for use with ferroelectric lead zirconate–titanate (PZT) solid solutions. Under certain conditions, RuO2 can react with PZT to form lead ruthenate (Pb2Ru2O6⋅5) during processing at elevated temperatures resulting in lead depletion from PZT. The standard Gibbs e...

متن کامل

Synthesis of nanocrystalline BaTiO3 ceramics via hydrothermal condition and structural characterization by HRTEM and SAED

In the present work, we report a suitable approach for the preparation of BaTiO3 nanostructures via the hydrothermal condition using Dolapix ET85 as surfactant. The powders were investigated by X-ray diffraction (XRD), scanning election microscopy (SEM), energy-dispersive X-ray spectroscopy (EDAX), field emission transmission electron microscopy (FETEM), selected area electron diffra...

متن کامل

Synthesis of nanocrystalline BaTiO3 ceramics via hydrothermal condition and structural characterization by HRTEM and SAED

In the present work, we report a suitable approach for the preparation of BaTiO3 nanostructures via the hydrothermal condition using Dolapix ET85 as surfactant. The powders were investigated by X-ray diffraction (XRD), scanning election microscopy (SEM), energy-dispersive X-ray spectroscopy (EDAX), field emission transmission electron microscopy (FETEM), selected area electron diffra...

متن کامل

Fabrication and structural characterization of a resonant frequency PZT microcantilever

The fabrication and structural characterization of a surface micromachined, resonant frequency, Pb(Zr, Ti)O3 (PZT) microcantilever will be presented. The PZT microcantilever was fabricated using surface micromachining techniques, and used a low-stress silicon nitride thin film as the base material for the microcantilever onto which a PZT thin film was incorporated. The PZT thin film is used as ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Materials Science-Poland

سال: 2018

ISSN: 2083-134X

DOI: 10.1515/msp-2018-0033