Strontium Sulphate Scale Formation in Oil Reservoir During Water Injection at High-Salinity Formation Water

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

consequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir

there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...

Simulation and Experimental Studies of Mineral Scale Formation Effects on Performance of Sirri-C Oil Field under Water Injection

Water injection is an enhanced oil recovery method which is applied for number of reservoirs especially in the offshore fields around the world. Sea-water injection process is usually associated with important concerns affecting the efficiency, safety, and economy of the operation like formation damage, mineral scaling, early breakthrough and corrosion. Incompatibility between injected and ...

متن کامل

Hydrophilic PDMS microchannels for high-throughput formation of oil-in-water microdroplets and water-in-oil-in-water double emulsions.

Here we present a novel surface modification method based on the sequential layer-by-layer deposition of polyelectrolytes yielding hydrophilic microchannels in PDMS-based microfluidic devices. The coatings are long-term stable and allow for the generation of monodisperse oil-in-water microdroplets even several months after the channel surface treatment. Due to the robustness of the polyelectrol...

متن کامل

Improvement of Water Saturation and Formation Factor Parameters in a Clastic Reservoir, Zagros Basin, SW Iran

Water saturation (Sw) is one of the most important petro-physical parameter for evaluating the clastic horizons of hydrocarbon reservoir, which can be calculated using Archie's equation. The Archie's parameters (m, a) are the major source of uncertainty in the calculation of Sw. In order to obtain Archie's parameters, a total number of 117 sandstone samples, having resistivity measurements from...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Asian Journal of Applied Sciences

سال: 2009

ISSN: 1996-3343

DOI: 10.3923/ajaps.2009.300.317