Stresses in an Infinite Beam with a Semi-Circular Notch under Central Bending
نویسندگان
چکیده
منابع مشابه
Evaluating the Semi-Circular Bending Test for HMA Mixtures
Semi-Circular Bending (SCB) Test is a fast and accurate three-point bending test, which was originally used in rock mechanics. SCB test is going to be an accepted test method for asphalt concrete pavements. Different asphalt-mixture property-values such as tensile strength, stress intensity factor and fatigue can be obtained by this test. In this study, static and dynamic tests including SCB te...
متن کاملCasimir Energy of a Semi-Circular Infinite Cylinder
The Casimir energy of a semi-circular cylindrical shell is calculated by making use of the zeta function technique. This shell is obtained by crossing an infinite circular cylindrical shell by a plane passing through the symmetry axes of the cylinder and by considering only a half of this configuration. All the surfaces, including the cutting plane, are assumed to be perfectly conducting. The z...
متن کاملField of Stresses in an Isotropic Plane with Circular Inclusion under Tensile Stress
Within the framework of the linear theory of elasticity, the analytical equations for the components of the stress tensor for а plane with а circular inclusion under tensile loading have been derived using the method of superposition. The given approach allows one to describe the plane-stress state of the plane both for the case of rigid and "soft" inclusions. The obtained solutions have been c...
متن کاملMultimode radiation from an unflanged, semi-infinite circular duct with uniform flow.
Multimode sound radiation from an unflanged, semi-infinite, rigid-walled circular duct with uniform subsonic mean flow everywhere is investigated theoretically. The multimode directivity depends on the amplitude and directivity function of each individual cut-on mode. The amplitude of each mode is expressed as a function of cut-on ratio for a uniform distribution of incoherent monopoles, a unif...
متن کاملBuckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression
Delamination is one of the most common failure modes in composite structures. In the case of in-plane compressional loading, delamination of a layered flat structure can cause a local buckling in delaminated area which subsequently affects the overall stiffness of the initial structure. This leads to an early failure of the overall structure. Moreover, with an increase in load, the delaminated ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1953
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.19.87_79