Stress Relaxation of Commercial and Experimental Composite Resins
نویسندگان
چکیده
منابع مشابه
Surface failure of commercial and experimental restorative resins.
A single-pass test was used to study the surface failure of commercial and experimental restorative resins and composites. The surface failure observed for unfilled diacrylate resins was more severe than that seen for an unfilled acrylic resin. Addition of nonsilanated filler to the diacrylate resins increased the resistance to penetration but did not dramatically change the mode of surface fai...
متن کاملComparative Analysis of the Shrinkage Stress of Composite Resins
The aim of this study was to compare the shrinkage stress of composite resins by three methods. In the first method, composites were inserted between two stainless steel plates. One of the plates was connected to a 20 kgf load cell of a universal testing machine (EMIC-DL-500). In the second method, disk-shaped cavities were prepared in 2-mm-thick Teflon molds and filled with the different compo...
متن کاملErosion of composite resins.
The surface degradation of composite resins caused by accelerated aging was studied. Accelerated aging for 900 hours caused erosion of the resin matrices and exposure of filler particles. Differences in surface profiles after aging suggest that the materials eroded at different rates. Accelerated aging may model erosive wear of composites.
متن کاملViscoelastic properties of low-shrinking composite resins compared to packable composite resins.
The aim of this study was to evaluate the viscoelastic properties of novel low-shrinking composites and compare them to those of packable composites. Six materials were tested: Clearfil Majesty Posterior (CM), ELS Extra Low Shrinkage (EL), Filtek P60 (FP), Filtek Silorane (FS), Prodigy (PR) and Surefil (SU). Static and dynamic testing was performed and materials were tested dry and wet at diffe...
متن کاملComparison of radiopacity of different composite resins
BACKGROUND The radiopacity of composite resins has been considered as an important requirement, improving the radiographic diagnosis. AIM The present study aimed to compare the radiopacity of eight different composite materials using an aluminum step wedge. MATERIALS AND METHODS Eight different composite resins were used in this study. The samples were prepared using a stainless steel mold ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of the Kyushu Dental Society
سال: 1976
ISSN: 0368-6833,1880-8719
DOI: 10.2504/kds.30.562