Stress Concentration in Notched Bars under Tension or Bending : 2nd Report, U-Grooved Shafts
نویسندگان
چکیده
منابع مشابه
Composite Strips with a Circular Stress Concentration under Tension
A series of tensile experiments were performed on S2 glass/toughened epoxy composite strips with a center hole or a pin joint at various temperatures within the range of −60C and 125C. Four different lay-up configurations each of 24 layers: [0°], [0°/90°], [45°/−45°] and [0°/45°/90°/−45°] and four different hole diameters: 1/8”, 1/4”, 3/8”, 1/2” were used in both types of specimens. For certain...
متن کاملCombined Plastic Bending and Compression or Tension
So far we have assumed that a plastic hinge forms if the bending moment in a critical cross section reaches the plastic limit value, M0. We have tacitly neglected the effect of the other internal forces on the formation of the yield hinge. This effect, however, can be appreciable, for example in multi-storey frames or frames with a large horizontal thrust where the axial forces are large. So, w...
متن کاملSTRESS CONCENTRATION FACTORS FOR V-NOTCHED PLATES UNDER AXISYMMETRIC PRESSURE by NATHAN
The topic of this thesis is the investigation of the local states of stress resulting from the introduction of a v-notch in a coaxial circle on the pressurized surface of a circumferentially clamped plate subject to axisymmetric loading. The understanding of the fracture behavior of a component experiencing such a condition is of particular interest to the aerospace and defense industries where...
متن کاملU the Spo under 2nd I Ken L R-reso
In this talk, I will describe the development of a Malay-English bidirectional speech translation system in the Institute for Infocomm Research, Singapore, as part of the Asian Speech Translation Advanced Research Consortium. I will introduce the basic components and the linguistic resources, in particular, large vocabulary continuous speech recognition, speech synthesis, and machine translatio...
متن کامل3D numerical modelling of twisting cracks under bending and torsion of skew notched beams
The testing of mode III and mixed mode failure is every so often encountered in the dedicated literature of mechanical characterization of brittle and quasi-brittle materials. In this work, the application of the mixed strain displacement ε − u finite element formulation to three examples involving skew notched beams is presented. The use of this FE technology is effective in problems involving...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1972
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.38.1673