Stress Concentration at Load-Carrying Fillet Welded Cruciform Joints Subjected to Tensile and Bending Loads
نویسندگان
چکیده
منابع مشابه
Comparison of the stress intensity factor of load-carrying cruciform welded joints with different geometries
The investigation of fatigue strength needs an accurate solution and reliable values of the stress intensity factor (SIF). In this study, SIF of load-carrying cruciform welded joints has been evaluated using finite element method (FEM), and compared with the available solutions from literature. Load-carrying cruciform welded joints with isosceles triangles and non-isosceles triangle fillet weld...
متن کاملStress Concentration Factors in Uniplanar Tubular KT-Joints of Jacket Structures Subjected to In-Plane Bending Loads
In the present research, data extracted from the stress analysis of 46 finite element models, verified using test results obtained from an experimental investigation, were used to study the effect of geometrical parameters on the chord-side stress concentration factors (SCFs) of central and outer braces in uniplanar tubular KT-joints of offshore structures subjected to four different types of i...
متن کاملDegree of Bending (DoB) in Tubular KT-Joints of Jacket Structures Subjected to Axial Loads
The fatigue life of tubular joints commonly found in offshore industry is not only dependent on the value of Hot-spot stress (HSS), but is also significantly influenced by the through-the-thickness stress distribution characterized by the degree of bending (DoB). The determination of DoB values in a tubular joint is essential for improving the accuracy of fatigue life estimation using the stres...
متن کاملPropagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads
Due to the mismatch of mechanical properties in composite laminates, propagation of delami-nation is considered as a severe damage mechanism in beams with various lay-up configurations. Delamination can be generated due to matrix cracking propagation or it can also be initiated due to the manufacturing process before using composite beams. Using a micromechanics model, this study is aimed to in...
متن کاملThe Effect of Ultrasonic Peening Treatment on Fatigue Performance of Welded Joints
Ultrasonic peening treatment (UPT) as a method of severe plastic deformation was used to treat cruciform welded joints of Q345 steel. The application of UPT achieves material surface nanocrystallization of the peening zone, reduces stress concentration, and produces residual compressive stresses at the welded toe. Micro-structure, hardness, stress relief, S-N curve, and the fatigue fracture mec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Mechanica et Automatica
سال: 2019
ISSN: 2300-5319
DOI: 10.2478/ama-2019-0033