Stress Concentration around The Notch of Elastomeric Sheets under Tension
نویسندگان
چکیده
منابع مشابه
Composite Strips with a Circular Stress Concentration under Tension
A series of tensile experiments were performed on S2 glass/toughened epoxy composite strips with a center hole or a pin joint at various temperatures within the range of −60C and 125C. Four different lay-up configurations each of 24 layers: [0°], [0°/90°], [45°/−45°] and [0°/45°/90°/−45°] and four different hole diameters: 1/8”, 1/4”, 3/8”, 1/2” were used in both types of specimens. For certain...
متن کاملSingle-edge crack growth in graphene sheets under tension
Department of Mechanics of Materials, School of Mechanical Engineering, Hanoi University of Science and Technology, No. 1, Dai Co Viet Road, Hanoi, Viet Nam b International Research Center for Computational Materials Science, Hanoi University of Science and Technology, No. 1, Dai Co Viet Road, Hanoi, Viet Nam Department of Engineering Science and Mechanics, M/C 0219, Virginia Polytechnic Instit...
متن کاملInfluence of Stress Concentration Factor on Magnetic Memory Effect of Steel Samples under Dynamic Tension Load
Under the excitation of geomagnetic field, normal component of surface scattering magnetic field intensity Hp(y) changes of steel tensile samples with different stress concentration factors α were studied. Constant amplitude sinusoidal tensile load cycles were applied on 18CrNi4A steel plate samples whose α were respectively 1, 3 and 5. Then the correlation of Hp(y) value changes with loading c...
متن کامل3D Stress Distribution Analysis around Blind-holes in Thin Plates Under Non-uniform Tension Loads
A three-dimensional photo elasticity analysis and an interactive finite-element package were used in parallel to analyze the stress distribution on the root of blind-holes in thin plates. Experimental analysis was conducted via stress freezing method. The FEM analysis was performed with the ABAQUS commercial code using material properties obtained experimentally as input. The results showed tha...
متن کاملStress Concentration around Countersunk Hole in Isotropic Plate under Transverse Loading
An investigation into the effect of countersunk depth, plate thickness, countersunk angle and plate width on the stress concentration around countersunk hole is carried out with the help of finite element analysis. The variation of stress concentration with respect to these parameters is studied for three types of loading viz. uniformly distributed load, uniformly varying load and functionally ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Colour Material
سال: 1957
ISSN: 0010-180X
DOI: 10.4011/shikizai1937.30.437