Stress analysis of single-bolt, single-lap, countersunk composite joints with variable bolt-hole clearance
نویسندگان
چکیده
منابع مشابه
Evaluation of Fatigue Life Reduction Factors at Bolt Hole in Double Lap Bolted Joints Using Volumetric Method
In this research, the influence of bolt preload on the fatigue strength of 2024-T3 aluminium alloy double lap bolted joints has been studied experimentally and numerically. To do so, three sets of the specimens were prepared and each of them subjected to tightening torque of 1,2.5 and 5 N-m and then fatigue tests were conducted under various cyclic axial load levels. In the numerical method, th...
متن کاملAnalytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملMeasurement of Load Distribution in Multi-bolt, Composite Joints, in the Presence of Varying Clearance
An experimental study is presented on the effects of bolt-hole clearance on the load distribution in multi-bolt composite joints. Single-shear, three-bolt joints were studied. The specimens were manufactured from graphite/epoxy HTA/6376, with quasi-isotropic lay-ups. Protruding head bolts of 8 mm diameter and torqued to finger-tight conditions were used. Different combinations of clearance were...
متن کاملSemi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints
A novel semi analytical method is developed for transient analysis of single-lap adhesive joints with laminated composite adherends subjected to dynamical loads. The presented approach has the capability of choosing arbitrary loadings and boundary conditions. In this model, adherends are assumed to be orthotropic plates that pursuant to the classical lamination theory. Stacking sequences can be...
متن کاملA review on stress distribution, strength and failure of bolted composite joints
In this study, analytical models considering different material and geometry for both single and double-lap bolted joints were reviewed for better understand how to select the proper model for a particular application. The survey indicades that the analytic models selected for the adhesively single or double bolted lap joints, as well as T, scarf, and stepped joints, with linear material pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composite Structures
سال: 2012
ISSN: 0263-8223
DOI: 10.1016/j.compstruct.2011.10.004