Stress Analysis of Helical Corrugated Tube under Axial Tension
نویسندگان
چکیده
منابع مشابه
Cascade unlooping of a low-pitch helical spring under tension
We study the force vs extension behaviour of a helical spring made of a thin torsionally-stiff anisotropic elastic rod. Our focus is on springs of very low helical pitch. For certain parameters of the problem such a spring is found not to unwind when pulled but rather to form hockles that pop-out one by one and lead to a highly non-monotonic force-extension curve. Between abrupt loop pop-outs t...
متن کاملMechanical Behavior of BFRP-Steel Composite Plate under Axial Tension
Combining the advantages of basalt fiber-reinforced polymer (BFRP) material and steel material, a novel BFRP-steel composite plate (BSP) is proposed, where a steel plate is sandwiched between two outer BFRP laminates. The main purpose of this research is to investigate the mechanical behavior of the proposed BSP under uniaxial tension and cyclic tension. Four groups of BSP specimens with four d...
متن کاملDynamic Responses of Irregular Fibers Under Axial Tension
A numerical study on the dynamic responses of irregular fibers under axial tension is presented in this article. The irregularity was represented by a sinusoidal shape profile along the fiber axis. The finite element method was used in the simulations and the maximum first principal stress due to the dynamic pulling has been examined. Our numerical results indicate that the first principal stre...
متن کاملBuckling Analysis of Cylindrical Grooved Shell under Axial Load Discs
In this paper, buckling of cylindrical grooved shells under axial load has been examined by theoretical and experimental methods. The shell is made of USA/API – X42 5L steel standards. This material is one of the most common materials used in gas, oil and petrochemical industries. The effect of spiral grooves on cylindrical shell was analyzed, and the results obtained from the Abaqus software w...
متن کاملControllable energy absorption of double sided corrugated tubes under axial crushing
To maximize the controllable energy absorption of corrugation troughs as observed in the single sided corrugated (SSC) tube, we proposed and tested a new structure design, i.e., double-sided corrugated (DSC) tube made of Al 6060-T6 aluminum alloy or CF1263 carbon/epoxy composite. Finite element models were developed to test the mechanical advantage of the DSC tube in comparison with both SSC an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1966
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.32.418