Stress analysis of composite spur gear using ansys workbench

Spur Gear Tooth Stress Analysis And Stress Reduction

Gears are commonly used for transmitting power. They develop high stress concentration at the root and the point of contact. The repeated stressing on the fillets causes the fatigue failure of gear tooth. The main objective of this study is to add different shaped holes to reduce stress concentration. A finite element model of Spur gear with a segment of three teeth is considered for analysis a...

ANSYS Workbench User's Guide

Transient Stress Analysis on Medium Modules Spur Gear by Using Mode Super Position Technique

Natural frequencies and dynamic response of a spur gear sector are investigated using a two dimensional finite element model that offers significant advantages for dynamic gear analyses. The gear teeth are analyzed for different operating speeds. A primary feature of this modeling is determination of mesh forces using a detailed contact analysis for each time step as the gears roll through the ...

design and optimization of metal matrix composite (mmc’s) spur gear

gears are one of the most critical components in power transmission system of an automobile and also many rotating machinery. many studies have been conducted on optimum gear design. the main objective is to design different aluminium metal matrix composite spur gears before and after optimization. aluminium metal matrix material composites are preferred mostly due to their low density. also th...

Finite Element Analysis Of Disc Brake By ANSYS Workbench

The brakes must be strong enough to stop the vehicle within a minimum distance in an emergency. The driver must have proper control over the vehicle during emergency braking and vehicle must not skid. The brakes must have good antedate characteristics their effectiveness should not decrease with prolonged application and thus it demand that the cooling of the brakes should be very efficient. Fo...