Stress Analysis for Steel Plate with Multilayered CFRP under Uniaxial Loading
نویسندگان
چکیده
منابع مشابه
Retrofitting of Beam-Column Joint Using CFRP and Steel Plate
─This paper presents the retrofitting of beam-column joint using CFRP (Carbon Fiber Reinforced Polymer) and steel plate. This specimen was tested until failure up to 1.0% drift. This joint suffered severe damages and diagonal cracks at upper crack at upper column before retrofitted. CFRP were wrapped at corbel, bottom and top of the column. Steel plates with bonding were attached to the two bea...
متن کاملFinite Plate with Circular and Square Hole under Partial Loading
In this paper a general analytical solution is obtained to find stress distribution in a finite elastic plate with a circular or square hole subjected to arbitrary biaxial partial loading using modified boundary condition by assuming plane stress conditions. The method employed is based on solution of circular hole in finite rectangular plate. This plate is mapped to circular ones and the parti...
متن کاملLattice strain evolution during uniaxial tensile loading of stainless steel
Applied and residual lattice strains were determined by neutron diffraction during a tensile test of a weakly textured austenitic stainless steel and were compared to the predictions of a self-consistent polycrystal deformation model. Parallel to the tensile axis the model predictions are generally within the resolution of the diffraction measurements, but perpendicular to the tensile axis disc...
متن کاملAnalysis of Concrete Bridge Girders Strengthened with Cfrp Laminates under Service and Extreme Loading Conditions
Externally bonded carbon fiber reinforced polymer (CFRP) laminates are a feasible and economical alternative to traditional methods for strengthening and stiffening deficient reinforced concrete and prestressed concrete girders as shown in Fig. (1). Although extensive research has already been undertaken to investigate the behavior of CFRP strengthened bridge girders, the majority of work condu...
متن کاملStepped-end Design for Carbon Fiber -reinforced Plastic (cfrp) Bonded onto a Steel Plate under Uni-axial Load
In the application of multiple Carbon Fiber-Reinforced Plastic (CFRP) plates onto a structural steel member, stepping of the CFRP plate ends is often adopted to prevent debonding. This approach requires the nonuniform extension of CFRP plate lengths. In this study, to shorten the length of CFRP plates, a nonuniform overlapping arrangement of several CFRP plate ends was proposed and the theoreti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2011
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2011.07.303