Stress aging of aluminum alloys.
نویسندگان
چکیده
منابع مشابه
Aging and Mechanical Behavior of Be-Treated 7075 Aluminum Alloys
The present study was undertaken to investigate the effect of pre-aging and aging parameters (time and temperature) on the mechanical properties of Al-Mg-Zn (7075) alloys. Ultimate tensile strength, 0.5% offset yield strength and % elongation measurements were carried out on specimens prepared from cast and heat treated 7075 alloys. Aging treatments were carried out for the as solution treated ...
متن کاملAging and Mechanical Behavior of Be-Treated 7075 Aluminum Alloys
The present study was undertaken to investigate the effect of pre-aging and aging parameters (time and temperature) on the mechanical properties of Al-Mg-Zn (7075) alloys. Ultimate tensile strength, 0.5% offset yield strength and % elongation measurements were carried out on specimens prepared from cast and heat treated 7075 alloys. Aging treatments were carried out for the as solution treated ...
متن کاملanisotropy induced biaxial stress-strain relationships in aluminum alloys
recently, offshore and ocean engineering have been dealing with novel materials that play a significant role in reducing the weight of structures used in the ship construction industry. 5xxx series of aluminum alloys are of the novel alloys are suitable for construction of ship hulls and the topside structures of offshore platforms. within different 5xxx aluminum alloys, aa5083 is of great impo...
متن کاملAluminum and Aluminum Alloys Casting Problems
Aluminum castings have played an integral role in the growth of the aluminum industry since its inception in the late 19th century. The first commercial aluminum products were castings, such as cooking utensils and decorative parts, which exploited the novelty and utility of the new metal. Those early applications rapidly expanded to address the requirements of a wide range of engineering speci...
متن کاملMicrowave Sintering of Aluminum Alloys
Until 2000 almost all research in the microwave sintering area was confined to non-metallic materials. However, after the first report by Penn State in 1999 on full sintering of steel powders in microwave, now in the last few years there has been increasing interest in applying microwave energy for processing of variety of metallic materials. The present study is an extension of this work and r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1984
ISSN: 0451-5994
DOI: 10.2464/jilm.34.657