Strengthening Mechanisms of Ti and Nb Bearing Steel Plates Produced by Thermomechanical Control Process
نویسندگان
چکیده
منابع مشابه
investigation of continuous cooling transformations and microstructures in a low carbon ti-nb bearing microallyed steel by means of dilatometry and metallography
in this investigation, continuous cooling transformations and microstructures have been studied in detail in a low carbon ti-nb bearing microalloyed steel by means of dilatometry, metallography and hardness measurements. the results indicate that when the cooling rate is greater than 1˚c/s, the dilatation curve is associated with a major dilatation at relatively low transformation temperatures,...
متن کاملcontrol of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولPb(Zr,Ti)O3 nanofibers produced by electrospinning process
Lead zirconate titanate (PZT) nanofibers are obtained by electrospinning a sol-gel based solution and polyvinyl pyrrolidone (PVP) polymer, and subsequent sintering of the electrospun precursor fibers. The PVP content of the precursor solution is critical in the formation of the fully fibrous mats. Scanning electron microscope (SEM) is used to examine the morphology of the precursor fibers and a...
متن کاملEffect of austenitising and deformation temperatures on dynamic recrystallisation in Nb-Ti microalloyed steel
An investigation into influence of the austenitising temperature and the austenite deformation temperature on Nb precipitation and recrystallisation kinetics was carried out for a steel containing 0.081C-0.021Ti-0.064Nb (wt. %). The austenite grain structure was correlated to the dispersive properties of Nb atom clustering and precipitation. Irrespective of the austenitising temperature, deform...
متن کاملNumerical Simulation and Process Optimization on Cast Steel Bearing Sleeve
Article history: Received:29.09.2013. Received in revised form: 17.12.2013. Accepted: 24.12.2013. A three-dimensional Computer Aided Design (CAD) model of the bearing sleeve casting is established by Pro/E software. The ViewCast program is utilized for studying casting processes of solidification and mould-filling in order to optimize the casting technology. Based on the solidification simulati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1996
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.82.6_532