Strength, toughness and microstructural parameters in 2091 Al-Li system alloy.
نویسندگان
چکیده
منابع مشابه
Toughness-Strength Relations in the Overaged 7449 Al-Based Alloy
COST reduction is a key objective of modern airframe The 7449 and 7150 plates, respectively 30and 36-mm manufacture. This can be achieved by the design of materials thick, were provided by Pechiney CRV (Voreppe, France) with improved properties leading to weight reduction of the in a solutionized, quenched, and stretched condition (corresairframe structure and, therefore, reduction in fuel cons...
متن کاملMechanical Equation of State in an Al-Li Alloy
Existence of plastic equation of state has been investigated by performing a series of load relaxation tests at various temperatures using an Al-Li alloy. A plastic equation of state is first developed from a simple kinetics consideration for a mechanical activation process of a leading dislocation piled up against grain boundaries. A series of load relaxation test has been conducted at tempera...
متن کاملMacro-Segregation and Microstructural Characteristics in Rheo-Diecasting of a High Strength Al–4.8mass%Si–0.7mass%Mg Alloy
Rheo-diecasting with electro-magnetic stirring has been carried out to investigate macro-segregation and microstructural characteristics of a high strength AlSiMg alloy under various process conditions. The amount of initial heterogeneous nucleation and the degree of temperature uniformity in the slurry are dependent on the superheat of the melt at pouring into the slurry making vessel. The f...
متن کاملEffect of Microstructural Variations on the Tensile and Fracture Toughness Properties of Alloy 718 Welds
The effect of microstructural variations on the tensile and fracture toughness properties of Alloy 718 welds is reviewed. The microstructural parameters surveyed include heat treatment, longterm thermal aging and neutron irradiation. The two heat treatments that were characterized include the conventional heat treatment, per ASTM B637, and a modified heat treatment designed to improve the tough...
متن کاملYielding Phenomenon of an Al-3% Li Alloy
where the specimens are recovered but not recrystallized. This second type of yielding is characterized by a sharp yield drop and long yield elongation. A mechanism of the second type of yielding has not been investigated, but it is clear that the yielding phenomenon is not due to a simple effect of strain aging, because the specimens has recovered so that dislocation arrangements should have c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1995
ISSN: 0451-5994
DOI: 10.2464/jilm.45.127