Strength prediction and stress analysis of adhesively bonded composite joints using meshless methods
نویسندگان
چکیده
منابع مشابه
Analytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملComputational Models of Adhesively Bonded Joints
Simulations using the Finite Element Method (FEM) play an increasingly important role in the design process of joints and fasteners in the aerospace industry. In order to utilize the potential of such adhesive bonding, there is an increasing need for effective and accurate computational methods. The geometry and the nature of an adhesive joint are, however, not so simple to describe effectively...
متن کاملStrength Prediction of Adhesively-bonded Scarf Repairs in Composite Structures under Bending
This work reports on the experimental and numerical study of the bending behaviour of two-dimensional adhesively-bonded scarf repairs of carbon-epoxy laminates, bonded with the ductile adhesive Araldite 2015. Scarf angles varying from 2 to 45o were tested. The experimental work performed was used to validate a numerical Finite Element analysis using ABAQUS and a methodology developed by the aut...
متن کاملA Probabilistic Method to Predict the Strength of Adhesively Bonded Joints of Gfrp
Experimental and numerical investigations were carried out on adhesively bonded full-scale double lap joints from pultruded GFRP profiles with relatively thick adhesive layers, needed in infrastructure applications to compensate for tolerances. The influence of different geometrical parameters on the joint strength was investigated, namely the thickness of the adhesive layer (from 5 to 35 mm), ...
متن کاملDisbond detection in adhesively bonded composite structures using vibration signatures
This paper presents a structural health monitoring technique based on analysis of the dynamic signature of the structure, which changes as damage occurs, due to alterations in structural properties such as stiffness and damping. Experiments performed on plate specimens and T-joint specimens which had various degrees of damage in the form of delaminations showed that it is possible to quantify t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Manufacturing
سال: 2020
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2020.10.127