Strength of masonry subjected to in-plane loading: A contribution
نویسندگان
چکیده
منابع مشابه
Limit states of modern unreinforced clay brick masonry walls subjected to in-plane loading
Recent research showed that the in-plane horizontal displacement capacity of unreinforced masonry (URM) walls depends on numerous factors that are not yet captured by current empirical drift capacity models; e.g., axial stress, shear span, geometry of the walls and the material used. In order to improve the performance-based assessment of URM wall buildings, future research should aim at develo...
متن کاملJournal of Composites for Construction Design of FRP-Strengthened Infill Masonry Walls Subjected to Out-of-Plane Loading
4 FRP strengthening systems for infill masonry walls are typically designed to resist flexural stresses due to out-of5 plane pressure. Previous research has shown that there are potential premature failure mechanisms due to shear 6 sliding of the infill, which could reduce the effectiveness of the strengthening system. Current design guidelines for 7 strengthening of masonry walls with fiber-re...
متن کاملMultiple cracks in an elastic half-plane subjected to thermo-mechanical loading
An analytical solution is presented for the thermoelastic problem of a half-plane with several cracks under thermo mechanical loading using distributed dislocation technique. The uncoupled quasi-static linear thermoelasticity theory is adopted in which the change in temperature, if any, due to deformations is neglected. The stress field in a half-plane containing thermoelastic dislocation is ob...
متن کاملA Study of the Progressive Degradation of Masonry Shear Walls Subjected to Harmonic Loading
This masonry research investigated the differences in the static and dynamic stiffness for the seismic range of loads and frequencies for a pressed clay masonry wythe. The effective stiffness has been defined in Newtonian physics and Damage Mechanics. This research used the concept of measured stiffness defined as the measured stress field divided by the measured strain field. A two-part test r...
متن کاملanalysis of elastic-plastic behavior of fiber metal laminates subjected to in-plane tensile loading
fiber metal laminates are hybrid laminates consisting of thin alternating bonded layers of aluminum and fiber/epoxy. arall (aramid aluminum laminate) and galare (glass fiber reinforced aluminum laminate) are specific kinds of fiber metal laminates that consist of thin aluminum sheets along with kevlar/epoxy and glass/epoxy composite layers, respectively. in this study, nonlinear tensile behavio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Solids and Structures
سال: 2011
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2010.11.019