Strength of composite plate with parallel offset misalignment double-bolted joint under bending moment
نویسندگان
چکیده
منابع مشابه
Recent Advances in Bolted composite Joint Strength Prediction
AMPTIAC Directory ... 15 The beginning In late 1993, the Mechanics and Surface Interactions Branch of the Air Force Research Laboratory’s Materials Directorate (AFRL/MLBM) was tasked to investigate the accuracy of the analysis methods used to predict the strength of bolted composite joints used on high-performance fighter aircraft such as the F-22 Raptor. The strength of bolted joints is essent...
متن کاملNumerical Prediction of Bearing Strength on Composite Bolted Joint Using Three Dimensional Puck Failure Criteria
Mechanical fasteners especially bolting is commonly used in joining carbon-fiber reinforced polymer (CFRP) composite structures due to their good joinability and easy for maintenance characteristics. Since this approach involves with notching, a proper progressive damage model (PDM) need to be implemented and verified to capture existence of damages in the structure. A three dimensional (3D) fa...
متن کاملStrength Prediction of Double-Lap Woven CFRP Bolted Joint Incorporating Material Softening
Strength prediction is discussed using a traction-separation damage model incorporating material softening for bolted joint that fails in bearing mode. The modelliug approach in the bolted double-lap joint of current work is a simplistic approach to predict the strength of bearing failures. This is clearly shown in bearing failure which occurred experimentally at higher W/d ratios. A simple met...
متن کاملBehavior of Steel–Concrete Composite Beams with Corroded Shear Studs Under Negative Bending Moment
The behavior of corroded steel–concrete composite beams under hogging moment was studied by experimental investigation and theoretical analysis. A total of eight specimens, six of which had corroded shear studs, were tested. The corrosion rate of studs ranged from 0 to approximately 50%. The constant-current accelerated corrosion method was adopted to accelerate the corrosion process. The loadi...
متن کاملStrength Prediction in CFRP Woven Laminate Bolted Double-Lap Joints under Quasi-static Loading using XFEM
The current paper is concerned with modelling damage and fracture in woven fabric composite double-lap bolted joints that fail by net-tension. A 3-D finite element model is used, which incorporates bolt clamp-up, to model a range of CFRP bolted joints, which were also tested experimentally. The effects of laminate lay-up, joint geometry, hole size and bolt clamp-up torque were considered. An Ex...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2019
ISSN: 2261-236X
DOI: 10.1051/matecconf/201926401002