Strength Development and Lateral Load Resisting Properties of Expanded Polystyrene Based Lightweight Concrete Panels
نویسندگان
چکیده
"ENGINEER", established in 1973 by The Institution of Engineers, is a Journal for dissemination Engineering knowledge, published quarterly.If you are interested contributing an Original Technical Paper based on research the author(s) (intended Section I) or Article Professional interest related to Engineering. (Section II) this journal please go through publication checklist which can be downloaded from here.Cover DescriptionCover images show few views Maduru Oya reservoir and construction right bank canal. Sri Lanka, acknowledges Eng. L.D. Amila Sanjeewa Department Irrigation providing information project.
منابع مشابه
Adjusted Density High-strength Concrete Using Expanded Polystyrene Beads
This paper reports the results of an experimental investigation into the effects of incorporating varying amounts of expanded polystyrene beads on the engineering properties of high-strength concrete. It was observed that a density reduction of 8.3% caused compressive strength, tensile strength and modulus of elasticity to reduce by 48%, 39% and 15%, respectively. Drying shrinkage was marginall...
متن کاملPrediction of Lightweight Aggregate Concrete Compressive Strength
Nowadays, the better performance of lightweight structures during earthquake has resulted in using lightweight concrete more than ever. However, determining the compressive strength of concrete used in these structures during their service through a none-destructive test is a popular and useful method. One of the main methods of non-destructive testing in the assessment of compressive strength...
متن کاملMODELING FLEXURAL STRENGTH OF EPS LIGHTWEIGHT CONCRETE USING REGRESSION, NEURAL NETWORK AND ANFIS
Lightweight concrete (LWC) is a kind of concrete that made of lightweight aggregates or gas bubbles. These aggregates could be natural or artificial, and expanded polystyrene (EPS) lightweight concrete is the most interesting lightweight concrete and has good mechanical properties. Bulk density of this kind of concrete is between 300-2000 kg/m3. In this paper flexural strength of EPS is modeled...
متن کاملinternal curing of high strength self consolidating concrete by saturated lightweight aggregate - effects on material properties
self-desiccation is the major source of autogenous shrinkage and crack formation in low water-binder ratio (w/b) concretes which can be reduced by internal curing. in this paper performance of high strength self consolidating concrete (hs-scc) with w/b of 0.28 and 0.33 including autogenous shrinkage, drying shrinkage, compressive strength, and resistance to freezing-thawing was investigated. th...
متن کاملProperties of Green Lightweight Aggregate Concrete
With increasing concern over the excessive exploitation of natural aggregates, synthetic lightweight aggregate produced from environmental waste is a viable new source of structural aggregate material. The uses of structural grade lightweight concrete reduce considerably the self-load of a structure and permit larger precast units to be handled. In this paper, the mechanical properties of a str...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineer
سال: 2022
ISSN: ['1800-1122', '2550-3219']
DOI: https://doi.org/10.4038/engineer.v55i3.7524