Strength characteristics of fiber-reinforced light shotcrete
نویسندگان
چکیده
منابع مشابه
Polyamide Fiber Reinforced Shotcrete for Tunnel Application
This study intends to establish the mechanical properties of polyamide fiber reinforced shotcrete (PAFRS) in terms of compressive and flexural strengths, in accordance with ASTM C1609/C1609M-12. The mechanical properties identified the influence of polyamide fiber content on the PAFRS strength. This study evaluated the toughness of PAFRS and proposed additional toughness level criteria to bette...
متن کاملShear Strength of Fiber-Reinforced Clayey Sands
Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...
متن کاملShear Strength Characteristics of Fiber Reinforced Fly Ash
Disposal of an industrial waste like flyash produced from burning of coals in thermal power stations requires a large land area. The decreasing availability of good construction site has led to the increased use of low lying areas filled up with industrial wastes whose bearing capacity is low. In-situ treatment of such industrial waste fills; in order to improve their bearing capacity with rein...
متن کاملAn analysis of flexural strength and crack width for fiber-reinforced shotcrete used in weak rock mines
The National Institute for Occupational Safety and Health (NIOSH), Office of Mine Safety and Health, Ground Control Engineering Branch is investigating the use of shotcrete in weak rock mass mines with the objective of reducing fatalities and injuries resulting from rock fall accidents. When shotcrete is used as part of a multielement ground support system, there is a need to know the support c...
متن کاملLaboratory testing of steel fibre reinforced shotcrete
Uniaxial and triaxial compression tests on steel fibre reinforced shotcrete (SFRS) have been used to quantify the elastic–plastic response behaviour for both the peak and post-peak regions. The laboratory tests were conducted with a servo-controlled testing machine to obtain complete stress–strain curves. The test results include unconfined and triaxial compressive strengths, shear strengths an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S Web of Conferences
سال: 2020
ISSN: 2267-1242
DOI: 10.1051/e3sconf/202019201020