Strength assessment of adhesively bonded tile claddings
نویسندگان
چکیده
منابع مشابه
A Probabilistic Method to Predict the Strength of Adhesively Bonded Joints of Gfrp
Experimental and numerical investigations were carried out on adhesively bonded full-scale double lap joints from pultruded GFRP profiles with relatively thick adhesive layers, needed in infrastructure applications to compensate for tolerances. The influence of different geometrical parameters on the joint strength was investigated, namely the thickness of the adhesive layer (from 5 to 35 mm), ...
متن کاملEffects of Reinforcement Geometry on Strength and Stiffness in Adhesively Bonded Steel-Timber Flexural Beams
A finite element model is developed to analyse, as a function of volume fraction, the effects of reinforcement geometry and arrangement within a timber beam. The model is directly validated against experimental equivalents and found to never be mismatched by more than 8% in respect to yield strength predictions. Yield strength increases linearly as a function of increasing reinforcement volume ...
متن کاملComputational Models of Adhesively Bonded Joints
Simulations using the Finite Element Method (FEM) play an increasingly important role in the design process of joints and fasteners in the aerospace industry. In order to utilize the potential of such adhesive bonding, there is an increasing need for effective and accurate computational methods. The geometry and the nature of an adhesive joint are, however, not so simple to describe effectively...
متن کاملDesign Analysis of Adhesively Bonded Structures
The existing analytical solutions for the peeling and shearing stresses in polymeric adhesively bonded structures are either too inaccurate or too complex for adoption by practicing engineers. This manuscript presents a closed-form solution that is reasonably accurate yet simple and concise enough to be adopted by practicing engineers for design analysis and exploration. Analysis of these conci...
متن کاملStrength Prediction of Adhesively-bonded Scarf Repairs in Composite Structures under Bending
This work reports on the experimental and numerical study of the bending behaviour of two-dimensional adhesively-bonded scarf repairs of carbon-epoxy laminates, bonded with the ductile adhesive Araldite 2015. Scarf angles varying from 2 to 45o were tested. The experimental work performed was used to validate a numerical Finite Element analysis using ABAQUS and a methodology developed by the aut...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Solids and Structures
سال: 2011
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2011.03.012