Strength and Toughness Evaluation of a High Hardness Steel
نویسندگان
چکیده
منابع مشابه
Strength and Toughness of Reinforced Concrete with Coated Steel Fibers
The effect of zinc phosphate (ZP) and zinc calcium phosphate (ZCP) coatings on the reinforcing mechanisms of smooth steel fiber in cementitious matrix have been studied. The results of pull out tests illustrated that by coating smooth steel fiber the pull-out load may be increased up to 100%. The effect of zinc phosphate coating on interface bonding was more than zinc-calcium phosphate coating....
متن کاملInvestigation of Hardness and Impact Toughness of Zr-Microalloyed Cast Steel
Microalloyed cast steels are a group of microalloyed steels in which reliable mechanical properties could be achieved by heat treatment. In this work, the heat treatment processes were carried out on the cast specimens as the step samples by different thicknesses and Zr content. The results show that after homogenization, variations in thickness have no effect on the hardness. Also, after hea...
متن کاملEarthquake Response Evaluation of RC Frames using High Strength Steel
To achieve better structural performance, lesser damage along with minimum residual displacements is a main objective of earthquake resistant design. In ordinary steel reinforced concrete frames, chances of severe damage because of the lower strength of conventional steel are always present during strong earthquakes. With the invention of high-strength steel (HSS) it can be anticipated that its...
متن کاملa criical evaluation of prospect 1: iranian junior high school english book
این پایان نامه کتاب زبان انگلیسی پایه هفتم(پراسپکت 1) را بر اساس چک لیست کانینگ ورث (1995) مورد ارزیابی قراردهده و نقاط قوت و ضعب کتاب مذکور را بررسی می نماید. در گام دوم نیز از طریق مصاحبه با تعدادی از دبیران زبان انگلیسی که کتاب مورد نظر را تدریس می کنند، نظر دبیران را در مورد پراسپک 1 جویا می شود.
Bond of High Strength Concrete with High Strength Reinforcing Steel
This paper presents a study about the bond of high strength concrete with high strength steel. Fourteen pull out tests were carried out to determine the bond. The concrete strength was about 70 MPa and the steel was a 500 MPa grade. Bar diameters used were 12, 16, 20, 25, 28, 32 and 36 mm. In order to investigate the effect of cover, each test was done twice, once in a 240 mm diameter concrete ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1971
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.57.1_116