STRENGTH AND MICROSTRUCTURE OF COLD-ROLLED IF STEEL
نویسندگان
چکیده
منابع مشابه
Deformation Microstructure and Texture in a Cold-Rolled Austenitic Steel with Low Stacking-Fault Energy
Deformation microstructure and texture in a cold-rolled austenitic steel 310S with low stacking fault energy (SFE) have been investigated by SEM and TEM. When 310S plates were rolled by 95% in thickness reduction, a remarkable development of the brass-type preferred orientation was confirmed by X-ray diffraction. SEM observations of the specimens with such texture exhibited a layered structure ...
متن کاملMicrostructure and microtexture of highly cold-rolled commercially pure titanium
The microstructure and texture evolution of a commercially pure titanium sheet during cold-rolling is investigated in detail by X-ray diffraction and by orientation imaging in the FEG-SEM and in the TEM. The experimental data are compared with simulation results obtained by a viscoplastic self-consistent model. The aim of this work is to provide with a detailed description of the fine scale def...
متن کاملFatigue strength evaluation of self-piercing riveted cold rolled steel joints under mixed mode loading conditions
Fatigue strength of cross-shaped specimens of SPR joints made of SPCC was evaluated at load angles of 0°, 45°, and 90°. For the static strength at load angles of 0°, 45°, and 90°, the maximum loads were determined to be 4890N, 1969N, and 1611N, respectively. Regarding for the relationship between the load amplitude and the number of cycles (Nf), the results were 014 . 0 3 . 2209 − = f amp N P ,...
متن کاملMechanical Property Determination of Heavy Steel Plates and Cold Rolled Steel Sheets by Micro-magnetic Ndt
The presentation is to results recently obtained in collaborative research in the European steel programme performed by Fraunhofer-IZFP and co-operative steel industry producing rolling products. The objective was and is to characterize i.e. to predict mechanical properties like hardness, yield strength, tensile strength, deep drawing parameters rm and ∆r, etc., mainly online by use of contact-...
متن کاملDetermination of Condition of Recrystallised Grains After Annealing of Cold Rolled IF Grade Steel Sheets Based on Ultrasonic Measurements
The Interstitial Free (IF) grade steel sheets are used for auto body applications where these sheets require good formability/drawability property. To achieve this property the cold rolled sheets are annealed to obtain desirable texture in the recrystallised grains to avoid material failure during forming operation. The paper deals with an ultrasonic technique to determine the condition of the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Metallurgica Slovaca
سال: 2016
ISSN: 1338-1156,1335-1532
DOI: 10.12776/ams.v22i1.690