Strain-softening materials and finite-element solutions
نویسندگان
چکیده
منابع مشابه
Finite Element Modeling of Strain Rate and Grain Size Dependency in Nanocrystalline Materials
Nanocrystalline materials show a higher strain-rate sensitivity in contrast to the conventional coarse-grained materials and a different grain size dependency. To explain these phenomenon, a finite element model is constructed that considers both grain interior and grain boundary deformation of nanocrystalline materials. The model consist of several crystalline cores with different orientations...
متن کاملAn Efficient Strain Based Cylindrical Shell Finite Element
The need for compatibility between degrees of freedom of various elements is a major problem encountered in practice during the modeling of complex structures; the problem is generally solved by an additional rotational degree of freedom [1-3]. This present paper investigates possible improvements to the performances of strain based cylindrical shell finite element [4] by introducing an additio...
متن کاملDamage Assessment in Thin Materials: Finite Element Investigation Damage Assessment in Thin Materials: Finite Element Investigation
This thesis describes the process of detection, and if possible, also localization of the damage in non structural sheet-like materials. Simulation and analysis is carried out in ABAQUS with a FE model that has the same dynamic characteristics as the corresponding real material. Three types of damage forms are investigated: crack, hole and local weakness. Results presented in the report show th...
متن کاملAnalysis of Strain Inhomogeneity in Vortex Extrusion using Finite Element Method and Response Surface Methodology
The effect of geometrical parameters involved in vortex extrusion (VE) die design, on AA1050 aluminium alloy processed by VE were investigated using finite element analysis (FEA) and response surface methodology (RSM). For this, VE die length (L), reduction in area (RA), twist angle , and position of control points in Beziers' formulation (C1) were considered as input parameters and strain inho...
متن کاملCorrecting the stress-strain curve in hot compression test using finite element analysis and Taguchi method
In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Computers & Structures
سال: 1986
ISSN: 0045-7949
DOI: 10.1016/0045-7949(86)90210-5