Strain Rate-temperature Dependency of Impact Tensile Properties and Ductile Fracture Behavior in Ductile Cast Iron
نویسندگان
چکیده
منابع مشابه
Effects of Silicon on Mechanical Properties and Fracture Toughness of Heavy-Section Ductile Cast Iron
The effects of silicon (Si) on the mechanical properties and fracture toughness of heavy-section ductile cast iron were investigated to develop material for spent-nuclear-fuel containers. Two castings with different Si contents of 1.78 wt.% and 2.74 wt.% were prepared. Four positions in the castings from the edge to the center, with different solidification cooling rates, were chosen for micros...
متن کاملCasting and stress-strain simulations of a cast ductile iron component using microstructure based mechanical behavior
The industrial demand for increased component performance with concurrent reductions in component weight, development times and verifications using physical prototypes drives the need to use the full potential of casting and Finite Element Method (FEM) simulations to correctly predict the mechanical behavior of cast components in service. The mechanical behavior of the component is determined b...
متن کاملEffect of temperature on the high strain-rate fracture characteristics of ductile metals
Induction heating has been employed to rapidly raise the temperature of ferrous specimens prior to testing at strain-rates > 10 s". The results show a general tendency for the ductility of a specially-processed pure iron to decrease with temperature over the range tested (20400 C). Based on the experimental data and the results of numerical simulations of the experiment, an empirical fracture m...
متن کاملFatigue Performance of Forged Steel and Ductile Cast Iron Crankshafts
Fatigue is the primary cause of failure of crankshafts in internal combustion engines. The cyclic loading conditions and the stress concentrations in the crank pin fillets are unavoidable, and can result in fatigue failure. The objectives of this study were to compare the fatigue behavior of forged steel and ductile iron crankshafts from a one-cylinder engine as well as to determine if the fati...
متن کاملA Simple Method to Determine Ductile Fracture Strain in a Tensile Test of Plane Specimen’s
In several practical cases, the ultimate ductile fracture strain determined with tensile test is accepted as a material plasticity measure 1 . In this case, the plasticity has to be defined as an ability of a material to accommodate high permanent strains until fracture appears where this strain reaches certain value called ultimate fracture strain p. The strain value until fracture depends not...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1999
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.85.10_765