Strain-rate dependence for Ni/Al hybrid foams
نویسندگان
چکیده
منابع مشابه
Strain-rate dependence for Ni/Al hybrid foams
Shock absorption often needs stiff but lightweight materials that exhibit a large kinetic energy absorption capability. Open-cell metal foams are artificial structures, which due to their plateau stress, including a strong hysteresis, can in principle absorb large amounts of energy. However, their plateau stress is too low for many applications. In this study, we use highly novel and promising ...
متن کاملMeasurement and Modeling of Creep in Open-Cell NiAl Foams
Nickel-rich NiAl foams, consisting of open cells with hollow struts and exhibiting two relative densities (5.0 and 6.6 pct) and average cell sizes (1.27 and 0.85 mm), were creep tested between 800 °C and 1100 °C under compressive stresses between 0.10 and 1.50 MPa. For stresses lower than 0.50 MPa, the foams exhibit secondary creep with power-law behavior characterized by creep exponents and ac...
متن کاملRate Dependence of the Compressive Response of Ti Foams
Titanium foams of relative density ranging from 0.3 to 0.9 were produced by titanium powder sintering procedures and tested in uniaxial compression at strain rates ranging from 0.01 to 2,000 s. The material microstructure was examined by X-ray tomography and Scanning Electron Microscopy (SEM) observations. The foams investigated are strain rate sensitive, with both the yield stress and the stra...
متن کاملRate dependence and role of disorder in linearly sheared two-dimensional foams.
The shear flow of two-dimensional foams is probed as a function of shear rate and disorder. Disordered, bidisperse foams exhibit strongly shear rate dependent velocity profiles. This behavior is captured quantitatively in a simple model based on the balance of the time-averaged drag forces in the system, which are found to exhibit power-law scaling with the foam velocity and strain rate. Disord...
متن کاملSignificance of strain rate-dependence in modelling of organic materials
This paper explores the significance of the inherent strain rate-dependence of many biological materials. Such characteristics are pertinent to computational modelling of these materials for the purposes of surgical robotics and simulation. A pair of 2-dimensional fmite element models of the human brainlvenmcle system are developed and used to analyse the brain structural disease, hydrocephalus...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: EPJ Web of Conferences
سال: 2015
ISSN: 2100-014X
DOI: 10.1051/epjconf/20159404030