Strain Measurement during Welding Procedure. Application of the Laser Speckle Method to Strain Measurement in the Welding Process. (Report 5).
نویسندگان
چکیده
منابع مشابه
The Measurement of Released Radionuclides during TIG-Welding and Grinding
A. Reichelt, K.-H. Lehmann, A. Reineking, E. Eder 1 Technical Inspection Agency of Southern Germany (TÜV Süddeutschland), Subdepartment Environmental Radioactivity, Westendstr. 199, D-80686 Munich, Germany 2 Isotope Laboratory for Biological and Medical Research, Georg-August-University of Göttingen, Burckhardtweg 2, D-37077 Göttingen, Germany 3 Government of Bavaria, State Ministry for State D...
متن کاملconsequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
Laser Digitizer Based Strain Measurement
Automotive sheet panel strain measurement usually involves large surface areas. For high resolution analysis, using the circle grid analysis method, several hundred elements must be measured. Existing technologies are limited to the small surface that area can be measured in one setup. As well, the (X,Y,Z) location on the part is not accurately available. This paper reports a new surface strain...
متن کاملReview of Real-Time Temperature Measurement for Process Monitoring of Laser Conduction Welding
Laser welding has been applied to various industries, in particular, automotive, aerospace and microelectronics. Primary aim of joining two metals by keeping their properties unaltered, that can be only possible by controlling temperature, heating and cooling rates. However measurement of weld pool temperature during laser spot welding is a difficult task because of the short pulse duration, of...
متن کاملA novel application of speckle interferometry for the measurement of strain distributions in semi-sweet biscuits
The spontaneous formation of cracks in biscuits following baking, also known as checking, is an issue that manufacturers would like to be able to predict and avoid. Unfortunately the mechanisms driving this phenomenon are not well understood. Speckle interferometry was used to study moisture-induced in-plane strain development in biscuits. This sensitive and non-contacting technique for measuri...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 2002
ISSN: 0288-4771
DOI: 10.2207/qjjws.20.531