Strain-hardening and warm deformation behaviors of extruded Mg–Sn–Yb alloy sheet
نویسندگان
چکیده
منابع مشابه
Strain hardening and heterogeneous deformation during twinning in Hadfield steel
We identify the role of deformation twinning and twin–twin intersections on the strain hardening behavior of Hadfield steel single crystals using strain field measurements. In situ and ex situ strain field measurements resolved at micrometer length scales are obtained using digital image correlation. Ex situ measurements reveal that macroscopic twin-bands, which are composed of a mixture of fin...
متن کاملTHE INFLUENCE OF DRY SLIDING ON PRCIPITATION HARDENING BEHAVIORS OF Al-Cu-Si ALLOY
Abstract: Cold working performed before an aging treatment has a significant effect on size and amount of precipitate produced. This could be caused by the increase in defect density, such as vacancies and dislocations. In this research, the Al-Cu-Si alloy was solution-treated, wear-tested and then artificially aged for a period of 1–5 h. Changes in the amount of precipitate, in the lattice par...
متن کاملHot Deformation Mechanisms in AZ31 Magnesium Alloy Extruded at Different Temperatures: Impact of Texture
The hot deformation characteristics of AZ31 magnesium alloy rod extruded at temperatures of 300 °C, 350 °C and 450 °C have been studied in compression. The extruded material had a fiber texture with > < 0 1 10 parallel to the extrusion axis. When extruded at 450 °C, the texture was less intense and the > < 0 1 10 direction moved away from the extrusion axis. The processing maps for the material...
متن کاملNumerical and experimental study of AZ 31 - O magnesium alloy warm sheet forming
Lightweight materials have been studied widely at present. Because weight reduction while maintaining functional requirements is one of the major goals in industries in order to save materials, energy and costs, etc. As the lightest structural alloys, magnesium alloys offer great potential to displace the most commonly used materials, because its density is about 2/3 of aluminum and 1/4 of stee...
متن کاملThe Anneal Hardening and Deformation Softening Behaviors of Nanocrystalline Cu-Zn Alloys
The changes in the mechanical properties and microstructure of nanocrystalline Cu-Zn alloys deformed by cryorolling during low temperature annealing and the post-process deformation were studied. The deformed Cu-Zn alloys exhibited uncommon anneal hardening and deformation softening behaviors. The degree of anneal hardening and deformation softening increased with the addition of the solute ato...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Magnesium and Alloys
سال: 2014
ISSN: 2213-9567
DOI: 10.1016/j.jma.2014.05.004