Strain Hardening and Uniform Elongation of 1700MPa Grade Maraging Steel
نویسندگان
چکیده
منابع مشابه
Strain hardening and heterogeneous deformation during twinning in Hadfield steel
We identify the role of deformation twinning and twin–twin intersections on the strain hardening behavior of Hadfield steel single crystals using strain field measurements. In situ and ex situ strain field measurements resolved at micrometer length scales are obtained using digital image correlation. Ex situ measurements reveal that macroscopic twin-bands, which are composed of a mixture of fin...
متن کاملStrain hardening behavior of aluminum alloyed Hadfield steel single crystals
Very high strain hardening coefficients (=G/23) are observed for aluminum-alloyed face-centered cubic Hadfield steel single crystals under tensile loading. Alloying with aluminum suppressed deformation twinning in two of the three crystallographic orientations studied, and transmission electron microscopy results revealed the existence of dense dislocation walls (sheets) along crystallographic ...
متن کاملSeismic Retrofitting of Steel Frames with Buckling Restrained and Ordinary Concentrically Bracing Systems with Various Strain Hardening and Slenderness Ratios
The present study assesses the seismic performance of steel moment resisting frames (SMFs) retrofitted with different bracing systems. Two structural configurations were utilized: ordinary concentrically braces (OCBFs), buckling-restrained braces (BRBFs). A 7-story and 18-story steel perimeter SMFs were designed with insufficient lateral stiffness to satisfy code drift limitations in high seism...
متن کاملMagnetic Micro-probe Determination of the Condition of Maraging Steel
Microstructural and mechanical properties of precipitation-hardened maraging steel could be stated on a basis of magnetic properties of such a material. A correlation between mechanical and magnetic properties of the maraging steel is treated from the view of non-destructive testing during and after heat treatment as well as during use under unfavourable conditions at elevated operating tempera...
متن کاملHot tensile properties and strain hardening behaviour of Super 304HCu stainless steel
Super 304HCu austenitic stainless steel containing 2.3–3 (wt.%) of Cu is mainly used in superheaters and reheaters tubing of ultra super critical boilers which operates over 600 ◦C of steam temperature. Tensile tests were carried out on Super 304HCu, using nominal strain rate of 1 × 10−3 s−1, at room temperature, 550 ◦C, 600 ◦C and 650 ◦C. The tensile strength and elongation were found to decre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Iron and Steel Institute of Japan
سال: 1986
ISSN: 0021-1583,1881-1183
DOI: 10.2355/isijinternational1966.26.219