Strain Hardening and Recovery in High-Temperature Deformation by Pure-Metal Mode
نویسندگان
چکیده
منابع مشابه
Strain hardening and heterogeneous deformation during twinning in Hadfield steel
We identify the role of deformation twinning and twin–twin intersections on the strain hardening behavior of Hadfield steel single crystals using strain field measurements. In situ and ex situ strain field measurements resolved at micrometer length scales are obtained using digital image correlation. Ex situ measurements reveal that macroscopic twin-bands, which are composed of a mixture of fin...
متن کاملRecovery of strain-hardening rate in Ni-Si alloys
In this study, the recovery of strain-hardening rate (RSHR) was discovered for the first time in polycrystalline materials (Ni-Si alloys) that have only dislocation activities during tensile test. Detailed microstructure characterizations show that the activation of dislocations in the secondary slip systems during tensile deformation is the major reason for this RSHR. By taking into account ot...
متن کاملHigh-strain-rate Deformation of Pure Aluminum Reinforced with 25% Alumina Submicron Particles near the Solidus Temperature
Discontinuously reinforced aluminum metal matrix composites (MMCs) with about 20 vol.% reinforcement produced by powder metallurgy (PM) are attractive for many structural applications because of their high specific strength and stiffness. While they exhibit reduced ductility and toughness at room temperature, many of them can be superplastically deformed at high-strain rates in the vicinity of ...
متن کاملMicrostructure Development and Hardening during High Pressure Torsion of Commercially Pure Aluminium: Strain Reversal Experiments and a Dislocation Based Model
The effect of strain reversal on hardening due to high pressure torsion (HPT) was investigated using commercially pure aluminium. Hardening is lower for cyclic HPT (c-HPT) as compared to monotonic HPT (m-HPT). When using a cycle consisting of a rotation of 90° per half cycle, there is only a small increase in hardness if the total amount of turns is increased from 1 to 16. Single reversal HPT (...
متن کاملDeforming glassy polystyrene: Influence of pressure, thermal history, and deformation mode on yielding and hardening.
The toughness of a polymer glass is determined by the interplay of yielding, strain softening, and strain hardening. Molecular-dynamics simulations of a typical polymer glass, atactic polystyrene, under the influence of active deformation have been carried out to enlighten these processes. It is observed that the dominant interaction for the yield peak is of interchain nature and for the strain...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1978
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.42.4_432