Strain Distribution and Deformation-induced Martensitic Transformation in Tension for a TRIP Steel Plate
نویسندگان
چکیده
منابع مشابه
Analysis of deformation induced martensitic transformation in stainless steels
Many studies monitoring the formation of martensite during the tensile deformation of austenite report data which are, in principle, affected by both the applied stress and the resulting plastic strain. It is not clear in these circumstances whether the transformation is stress induced (i.e. the stress provides a mechanical driving force) or whether the generation of defects during deformation ...
متن کاملInvestigation of Transformation Induced Plasticity in High Al–low Si TRIP Steel
This study was conducted in order to investigate the influence of plastic deformation on the transformation of retained austenite in a TRIP steel with a high content of Al and a low content of Si. To the aim, appropriate treatments were used to produce the starting material (TRIP steel). The microstructure of the obtained steel was composed of bainite and phases including ferrite and retained a...
متن کاملMartensitic transformation of individual grains in low-alloyed TRIP steels
E. Jimenez-Melero,* N.H. van Dijk, L. Zhao, J. Sietsma, S.E. Offerman, J.P. Wright and S. van der Zwaag Fundamental Aspects of Materials and Energy, Faculty of Applied Sciences, Delft University of Technology, Mekelweg 15, 2629 JB Delft, The Netherlands Department of Materials Science and Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands European Synchrotro...
متن کاملShear and tensile plastic behavior of austenitic steel TRIP-120 compared with martensitic steel HSLA-100
Themechanical performanceofTRIP-120, a novel transformation induced plasticity steel alloy, is evaluated for different loading cases and strain rates. The performance is compared with HSLA-100, a lowalloy steel developed by the United States Navy and currently used in naval hulls. The response of these materials under uniaxial tension and shear was investigated to the point of fracture at isoth...
متن کاملStress-Assisted Isothermal Martensitic Transformation Application to TRIP Steels
Low-temperature plastic flow in TRIP steels has been found to be controlled by stress-assisted isothermal martensitic transformation. For these conditions, the thermodynamics and kinetic theory of martensitic transformations leads directly to constitutive relations predicting the dependence of flow stress on temperature, strain, strain-rate, and stress-state, consistent with the observed behavi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2020
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.isijint-2019-497