Strain Accumulation and Microstructural Evolution During Friction Stir Welding of Pure Magnesium
نویسندگان
چکیده
منابع مشابه
Microstructural evolution of 304 austenitic stainless steel in friction stir welding process
Friction stir welding (FSW) was conducted on AISI 304 austenitic stainless steel plate with 2 mm thickness. The FSW was performed at a welding and rotational speeds of 50 mm/min and 400 rpm, respectively. Microstructure observations by the optical microscopy showed that a severe grain refinement occurred in the stir zone (SZ). Electron backscattered diffraction analysis (EBSD) results indicated...
متن کاملMicrostructural evolution of 304 austenitic stainless steel in friction stir welding process
Friction stir welding (FSW) was conducted on AISI 304 austenitic stainless steel plate with 2 mm thickness. The FSW was performed at a welding and rotational speeds of 50 mm/min and 400 rpm, respectively. Microstructure observations by the optical microscopy showed that a severe grain refinement occurred in the stir zone (SZ). Electron backscattered diffraction analysis (EBSD) results indicated...
متن کاملBimetal friction stir welding of aluminum to magnesium
FSW material flow and phase transformation were studied at the interface of dissimilar welding of Al 6013 to Mg. Defect free butt weld was obtained when aluminum and magnesium test plates were placed in the advancing side and retreating side respectively, and the tool was placed 1 mm off the weld centerline into the aluminum side. In order to understand how the materials flow during FSW, steel ...
متن کاملEffect of Initial Microstructure on the Microstructural Evolution and Joint Efficiency of a WE 43 Alloy During Friction Stir Welding
The initial microstructure plays an important role in determining the spatial and temporal evolution of the microstructure during friction stir welding (FSW). The overall kinetics of microstructural evolution is location sensitive and the effect of the process strain, strain rate and thermal cycle creates complexities. In the present study, magnesium based WE43 alloy has been welded employing t...
متن کاملFinite element simulation of microstructure evolution during friction stir welding of automotive aluminum parts
7000 series Aluminum alloys are widely used in the automotive industries for structural lightweight components due to their exceptional high strength to weight ratio. However, this class of aluminum alloy is difficult to join by conventional fusion welding techniques so Friction stir welding (FSW) widely is used for welding this alloys. The process has been demonstrated to be effective and is c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Frontiers in Materials
سال: 2020
ISSN: 2296-8016
DOI: 10.3389/fmats.2020.603464