Storing CO2 with enhanced oil recovery

Enhanced Oil Recovery and CO2 Flooding/Sequestration in Carbonates

An Experimental Study of Surfactant Alternating CO2 Injection for Enhanced Oil Recovery of Carbonated Reservoir

Core flooding experiments were conducted with the objective of evaluating near miscible surfactant alternating CO2 injection and the effect of surfactant concentrations on gas-oil and water displacements in porous media. The core samples were provided from a low permeability mixed wet oil reservoir at 156 °F and 1900 psia. In addition, very few studies of surfactant adsorption on car...

Risk assessment for future CO2 Sequestration Projects Based CO2 Enhanced Oil Recovery in the U.S

This paper is the first of a series that attempts to assess the possible health and safety risks associated with large scale CO2 sequestration in deep brine reservoirs. The approach is based on analysis of available data on the operational track record from CO2 transportation and injection associated with enhanced oil recovery (CO2-EOR) in the US. This paper is particularly concerned with ident...

Increasing CO2 Storage in Oil Recovery

Carbon dioxide (CO2) injection has been used as a commercial process for enhanced oil recovery (EOR) since the 1970’s. Because the cost of oil recovered is closely linked to the purchase cost of the CO2 injected, considerable reservoir engineering design effort has gone into reducing the total amount of CO2 required to recover each barrel of oil. If, on the other hand, the objective of the CO2 ...

Fluorosurfactants in Enhanced Oil Recovery

Fluorosurfactants are effective in a variety of Enhanced Oil Recovery (EOR) techniques including (i) improving subterranean wetting, (ii) increasing foam stability, and (iii) modifying the surface properties of the reservoir formation. While fluorosurfactants have been used in gas and oil exploration for four decades, the increased demand for petroleum and the greater understanding of the benef...