Storage Ring Parameters for High Gain FEL
نویسندگان
چکیده
منابع مشابه
Small Signal Gain of the Super Aco Storage Ring Fel
The gain per pass of a Storage Ring Free Electron Laser is a crucial quantity to be known for a correct operation of the laser. The relatively low gain exhibited by second generation machines, as in the Super ACO case, calls for the minimization of the losses of the optical cavity for obtaining the laser oscillation. However, the gain needs to be evaluated accurately also on FELs installed on t...
متن کاملStorage Ring Design Optimization for Fel Operation
An electron beam in a storage ring seems to be a perfect driver for a free electron laser. The understanding of storage rings is very well advanced to.project designs with high peak current, small beam sizesand short damping times. Since the beam is recycled after passage through the optical cavity we can expect a relatively high overall efficiency. On the other hand, however the fact that we d...
متن کاملOptical klystron FEL scheme for x-ray coherent harmonic generation at ISLF storage ring
The possibility of inserting an optical klystron on the storage ring of an Iranian Light Source Facility as a Synchrotron Radiation Free electron Laser for coherence harmonic generation in the soft x-ray spectrum has been studied. The study has been performed using the 3D FEL simulation code GENESIS 1.3 and in accordance with the available characteristic parameters of ISLF. Different potential ...
متن کاملTemperature Sensors and Controls for the Duke FEL Storage Ring
This paper describes a prototype system used for sensing and control functions associated with the Duke University 1 GeV electron storage ring. Low cost industrial control systems have been used. The system is capable of handling at least four hundred devices.
متن کاملBeam Position Monitors for Duke Fel Storage Ring
The Duke FEL storage ring is a 1Gev electron ring, which is designed for driving UV-VUV free electron lasers. The ring has been in operation since November of 1994 [1] but the beam position monitors (BPMs) were connected and operated just recently. The BPM pick-ups are 4 stripline electrodes. In order to reduce the higher-order-mode loss excited by the stored beam at the BPM pick-up area, the B...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Nuclear Science
سال: 1985
ISSN: 0018-9499
DOI: 10.1109/tns.1985.4334388