Stochastic characteristics of powder metallurgy processing
نویسندگان
چکیده
منابع مشابه
Porous, Superelastic NiTi Produced by Powder-Metallurgy
Near-stoichiometric NiTi was foamed in the solid state at elevated temperatures through creep expansion of highpressure argon pores previously entrapped during powder consolidation. A sample with 17% porosity was found to be superelastic up to a compressive stress of 800 MPa.
متن کاملA Review of Nondestructive Testing Methods and Their Applicability to Powder Metallurgy Processing
The problem of forming defects in green parts during compaction and ejection has become more prevalent as parts producers have started to use higher compaction pressures in an effort to achieve high density, high performance P/M steels. In this review, several nondestructive inspection methods are evaluated, with the aim of identifying those, which are practical for detecting defects as early i...
متن کاملElectro Discharge Machining Characteristics of Mg/SiCP Metal matrix composites by Powder Metallurgy (P/M) Techniques
The objective of this work is to investigate the effects of current, pulse on time and pulse off time in Electro Discharge Machining performance on material removal rate and tool wear rate of Mg/SiCp metal matrix composites. In this work the Mg/SiCp metal matrix composite specimens were prepared by powder metallurgy route. ELEKTRA PLUS spark erosion machine was used for the purpose. Brass tool ...
متن کاملProcessing of Diamond Composites for Cutting Tools by Powder Metallurgy and Rotary Forging
This paper shows the manufacture route of the bronze 4% weight diamond composite rope for direct application as diamond wires, and linear saws in the slabbing and cutting of dimension stones. This route consists of powder mix compaction, sintering and rotary forging techniques. Tensile tests were performed, reaching an ultimate tensile strength of 230MPa for the diameter of ∅=1.84mm. Scanning e...
متن کاملLubricant Pyrolysis During Sintering of Powder Metallurgy Compacts
The chemistry surrounding the pyrolysis of N,NЈ-ethylenebisstearimide (EBS) compacted with iron powder is described for the first time. Heat treatment is carried out in a 5 vol pct hydrogen atmosphere (balance nitrogen) over the 100 °C to 850 °C range. The exhaust from the furnace is monitored by Fourier transform infrared and dispersive ultraviolet absorption spectroscopy; condensable material...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Mathematical Modelling
سال: 2015
ISSN: 0307-904X
DOI: 10.1016/j.apm.2015.03.013