STM observations near grain boundaries in deformed Al-Zn-Mg alloy.
نویسندگان
چکیده
منابع مشابه
Improve sensitization and corrosion resistance of an Al-Mg alloy by optimization of grain boundaries
The sensitization and subsequent intergranular corrosion of Al-5.3 wt.% Mg alloy has been shown to be an important factor in stress corrosion cracking of Al-Mg alloys. Understanding sensitization requires the review of grain boundary character on the precipitation process which can assist in developing and designing alloys with improved corrosion resistance. This study shows that the degree of ...
متن کاملDynamic observations of deformation in an ultrafine-grained Al–Mg alloy with bimodal grain structure
The tensile properties and deformation response of an ultrafine-grained (UFG) Al–Mg alloy with bimodal grain structure were investigated using a micro-straining unit and a strain mapping technique. Atomized Al 5083 powder was ball-milled in liquid N2 to obtain a nanocrystalline (NC) structure, then blended with 50 wt.% unmilled coarse-grained (CG) powder, and consolidated to produce a bimodal g...
متن کاملStudy on Mg/Al Weld Seam Based on Zn–Mg–Al Ternary Alloy
Based on the idea of alloying welding seams, a series of Zn-xAl filler metals was calculated and designed for joining Mg/Al dissimilar metals by gas tungsten arc (GTA) welding. An infrared thermography system was used to measure the temperature of the welding pool during the welding process to investigate the solidification process. It was found that the mechanical properties of the welded join...
متن کاملFRACTIONAL RECRYSTALLIZATION KINETICS IN DIRECTLY COLD ROLLED Al-Mg, Al-Mg-Sc AND Al-Mg-Sc-Zr ALLOY
The evaluation of texture as a function of recrystallization has been characterized for directly cold rolled Al-6Mg, Al-6Mg-0.4Sc and Al-6Mg-0.4Sc-0.2Zr alloys. Samples were annealed isothermally at 400 °C for 1 to 240 minutes to allow recrystallization. Recrystallization kinetics of the alloys is analyzed from the micro-hardness variation. Isothermally annealed samples of aluminum alloys were ...
متن کاملDISLOCATION INTERACTION WITH SEMICOHERENT PRECIPITATES (O PHASE) IN DEFORMED Al±Cu±Mg±Ag ALLOY
ÐThe interaction between dislocations and semicoherent precipitates (O phase) is discussed. The investigation shows that the semicoherent precipitate is cut by dislocations during deformation. Conventional TEM and HRTEM observations demonstrate that shearing of precipitates by dislocations occurs by multiple cutting of the precipitate. A strengthening mechanism is proposed based on this observa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1997
ISSN: 0451-5994,1880-8018
DOI: 10.2464/jilm.47.34