Stereoscopic PIV measurements of swirling flow entering a catalyst substrate
نویسندگان
چکیده
منابع مشابه
Steady Vortex Breakdown in Swirling Flow Inside a Closed Container: Numerical Simulations, PIV and LDV Measurements
Numerical simulations and measurements using PIV and LDV have been carried out for steady vortex breakdown inside a closed container. The numerical solution has been employed as a benchmark to assess the capabilities and limitations of the experimental techniques in a difficult flow case involving a double breakdown in the limit of the
متن کاملPIV measurements of a microchannel flow
A particle image velocimetry (PIV) system has been developed to measure velocity fields with order 1-lm spatial resolution. The technique uses 200 nm diameter flow-tracing particles, a pulsed Nd: YAG laser, an inverted epi-fluorescent microscope, and a cooled interline-transfer CCD camera to record high-resolution particle-image fields. The spatial resolution of the PIV technique is limited pri...
متن کاملDevelopment of a Low Cost and Safe PIV for Mean Flow Velocity and Reynolds Stress Measurements
In this study, a white light particle image velocimetry (WL PIV) system which employs a light sheet generated with a flash was used. The system was developed in order to provide a cost-efficient and safe alternative to laser systems while keeping the accuracy limits required for hydraulic model tests. To investigate the accuracy of WL PIV method under different flow conditions, experiments were...
متن کاملPIV measurements of flow in and around scour holes
Two sets of experiments related to the scour of cohesionless sediment by planar turbulent jets are presented and discussed. The first set of experiments measures the growth of the scour hole and downstream dune as a function of time. Measurements reveal a bedform that is nearly self-similar and whose growth in time is governed by a power-law relationship. The bedform is well represented by thre...
متن کاملPIV measurements of flow in a centrifugal blood pump: steady flow.
Magnetically suspended left ventricular assist devices have only one moving part, the impeller. The impeller has absolutely no contact with any of the fixed parts, thus greatly reducing the regions of stagnant or high shear stress that surround a mechanical or fluid bearing. Measurements of the mean flow patterns as well as viscous and turbulent stresses were made in a shaft-driven prototype of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Experimental Thermal and Fluid Science
سال: 2008
ISSN: 0894-1777
DOI: 10.1016/j.expthermflusci.2008.04.011