Stellite-6 surface layers reinforced with hard and refractory WC particles produced on steel for metal forming
نویسندگان
چکیده
منابع مشابه
Cladding of stellite composite on carbon steel by gas tungsten arc welding (GTAW)
This paper deals with the investigation of the microstructure and hardness of steel samples cladded with satellite 6-WC composites by using gas tungsten arc welding (GTAW) process. For this purpose, steel samples were coated with unreinforced and reinforced stellite (by 20, 30 and 40 wt.% WC). The cladded samples were evaluated by metallographic studies, microhardness measurement and X-ray diff...
متن کاملThe Effect of Siliconizing and Borosiliconizing Processes on Microstructure and Morphology of Carbon Steel Surface Layers
A study for optimizing of siliconizing and borosiliconizing processes on carbon steels has been carried out. The process parameters, i.e, time and powder mixture, were considered for optimization of the case depth, surface quality and the hardness profile.
Time and temperature of the processes were 4 hr and 950˚C, respectively. Powder mixture in siliconizing process was 2.5% ferrosilicon, 2....
متن کاملThe Effect of Siliconizing and Borosiliconizing Processes on Microstructure and Morphology of Carbon Steel Surface Layers
A study for optimizing of siliconizing and borosiliconizing processes on carbon steels has been carried out. The process parameters, i.e, time and powder mixture, were considered for optimization of the case depth, surface quality and the hardness profile. Time and temperature of the processes were 4 hr and 950˚C, respectively. Powder mixture in siliconizing process was 2.5% ferrosilicon, 2.5%...
متن کاملKinetics of Deposition of Colloidal Metal Oxide Particles on a Steel Surface * ' 1
The deposition of spherical a-Fe20 3 and rod-like B-FeOOH. particles on steel from aqueous dispersions of different pH and ionic strength using a packed column technique has been studied. A procedure was developed by which the coagulation of the suspended particles was minimized even in the presence of high electrolyte concentrations during the duration of an experiment. In the absence of the p...
متن کاملResidual Stresses in Rotating Steel Cylinders with Composite Surface Layers
After undergoing a manufacturing process, materials may exhibit internal stresses referred to as residual stresses. In steel-composite hybrid structures, residual stresses are typically formed due to the unequal thermal behaviour of the steel and composite. Thus, knowledge of the residual stress state is important in the assessment of the external-internal loading in steel-composite hybrid stru...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2018
ISSN: 1757-899X
DOI: 10.1088/1757-899x/393/1/012093