Steels with High Temperature Carbides - New Possibilities for Semi-Solid State Processing
نویسندگان
چکیده
منابع مشابه
High Temperature Behavior of Dual Phase Steels
Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...
متن کاملHafnium and tantalum carbides for high temperature solar receivers
Related Articles Transformation of concentrated sunlight into laser radiation on small parabolic concentrators J. Renewable Sustainable Energy 3, 053102 (2011) A photovoltaic system with three solar cells and a band-stop optical filter J. Renewable Sustainable Energy 3, 023113 (2011) Parametric analysis of a coupled photovoltaic/thermal concentrating solar collector for electricity generation J...
متن کاملCs4P2Se10: A new compound discovered with the application of solid-state and high temperature NMR
The new compound Cs4P2Se10 was serendipitously produced in high purity during a high-temperature synthesis done in a nuclear magnetic resonance (NMR) spectrometer. P magic angle spinning (MAS) NMR of the products of the synthesis revealed that the dominant phosphorus-containing product had a chemical shift of 52.8 ppm that could not be assigned to any known compound. Deep reddish brown well-for...
متن کاملhigh temperature behavior of dual phase steels
dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500c. stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500c, and smooth flow at the other temperatures. both yield and ultimate tensile strengths increased with increasing testing temperature up to about 4500c and then decreased at h...
متن کاملElectropulsing-induced steels strengthening at high temperature
Electropulsing usually reduces the stability of metastable phases in materials. This work reports the opposite effect, where electropulsing drives the stable -phase at high temperature to be decomposed. This enables both γ-phase and σ-phase in duplex stainless steel to survive and hence to strengthen the steel at high temperature. The hardness of the quenched sample after electropulsing is 49....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Solid State Phenomena
سال: 2014
ISSN: 1662-9779
DOI: 10.4028/www.scientific.net/ssp.217-218.325