Status of Plutonium Purification by Bismuth Solvent Anode Electrorefining
نویسندگان
چکیده
منابع مشابه
Bismuth Oxide: A New Lithium-Ion Battery Anode.
Bismuth oxide directly grown on nickel foam (p-Bi2O3/Ni) was prepared by a facile polymer-assisted solution approach and was used directly as a lithium-ion battery anode for the first time. The Bi2O3 particles were covered with thin carbon layers, forming network-like sheets on the surface of the Ni foam. The binder-free p-Bi2O3/Ni shows superior electrochemical properties with a capacity of 66...
متن کاملPlutonium in gonads: a summary of the current status.
A review of the literature was carried out to investigate the following: the fraction of Pu in the body that was in the gonads; the necessity for a localization factor in calculating the genetic dose to humans; and the possibility that an unexpectedly high relative biological effectiveness (RBE) causing genetic effects could occur for alpha particles. Human autopsy data from both occupationally...
متن کاملHydride-Catalyzed Corrosion of Plutonium by Air: Initiation by Plutonium Monoxide Monohydride
Chemistry and kinetics of air reactions with plutonium monoxide monohydride (PuOH) and with mixtures of the oxide hydride and plutonium metal are defined by results of pressure-volumetemperature (PVT) measurements. Tests with specimens prepared by total and partial corrosion of plutonium in 0.05 M sodium chloride solution show that reaction of residual water continues to generate H, after liqui...
متن کاملBismuth Oxysulfide and Its Polymer Nanocomposites for Efficient Purification
The danger of toxic organic pollutants in both aquatic and air environments calls for high-efficiency purification material. Herein, layered bismuth copper oxychalcogenides, BiCuSO, nanosheets of high photocatalytic activity were introduced to the PVDF (Polyvinylidene Fluoride). The fibrous membranes provide an easy, efficient, and recyclable way to purify organic pollutant. The physical and ph...
متن کاملUsing Taguchi Method to Optimize Recovery of Bismuth by Electrolysis
This paper presents a methodology, based on the taguchi parameter design approach, for the optimization of process parameters for bismuth recovery from aqueous solutions. The process parameters considered are [Bi3+], [NaCl], temperature, and cathodic current density. In addition, cell voltage and current efficiency as two responses have been considered. An orthogonal array L9, the signal-to-noi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ECS Proceedings Volumes
سال: 1987
ISSN: 0161-6374,2576-1579
DOI: 10.1149/198707.0888pv