STATISTICAL SUBSTANTIATION OF CONCRETE AND STEEL FIBER REIN-FORCED CONCRETE STRENGTH
نویسندگان
چکیده
منابع مشابه
Effect of the Concrete Strength on the Concrete-Steel Bond in Concrete Filled Steel Tubes
In this study, the concrete-steel bond strength of concrete filled cylindrical steel tubes has been experimentally investigated. 22 short, high strength and normal concrete filled circular steel tubes were tested. Push-out test was carried out as the common method to evaluate the bond carrying capacity. Four different concrete mixes were used in preparing the specimens. The steel tubes were w...
متن کاملExperimental Study of the Advanced Transient Concrete Model on Rein- forced Concrete Columns During Fire Exposure
The advanced transient concrete model (ATCM) is an extended model for concrete in compression at elevated temperature that incorporates elastic, plastic and creep strain as a function of temperature and stress history. The ATCM is applied with the material model of the thermal induced strain model. The non-linear model comprises thermal strain, elastic strain, plastic strain and transient tempe...
متن کاملSome Studies on Steel Fiber Reinforced Concrete
Fibres are generally used as resistance of cracking and strengthening of concrete. In this project, I am going to carry out test on steel fibre reinforced concrete to check the influence of fibres on flexural strength of concrete. According to various research papers, it has been found that steel fibres give the maximum strength in comparison to glass and polypropylene fibres. Hence, in this pr...
متن کاملRELATIONSHIP OF TENSILE STRENGTH OF STEEL FIBER REINFORCED CONCRETE BASED ON GENETIC PROGRAMMING
Estimating mechanical properties of concrete before designing reinforced concrete structures is among the design requirements. Steel fibers have a considerable effect on the mechanical properties of reinforced concrete, particularly its tensile strength. So far, numerous studies have been done to estimate the relationship between tensile strength of steel fiber reinforced concrete (SFRC) and ot...
متن کاملBond of High Strength Concrete with High Strength Reinforcing Steel
This paper presents a study about the bond of high strength concrete with high strength steel. Fourteen pull out tests were carried out to determine the bond. The concrete strength was about 70 MPa and the steel was a 500 MPa grade. Bar diameters used were 12, 16, 20, 25, 28, 32 and 36 mm. In order to investigate the effect of cover, each test was done twice, once in a 240 mm diameter concrete ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Belgorod State Technological University named after. V. G. Shukhov
سال: 2019
ISSN: 2071-7318
DOI: 10.12737/article_5c5062099aebc6.33938587