STATISTICAL STUDY ON ULTIMATE STRENGTH CURVES OF LONGITUDINALLY STIFFENED PLATES UNDER UNIAXIAL COMPRESSION
نویسندگان
چکیده
منابع مشابه
Failure Prediction of Stringer Stiffened Composite Panels with Impact Damage under Uniaxial Compression
The in-plane compressive behaviour of thin-skin stiffened composite panels with a stress concentrator in the form of an open hole or low velocity impact damage is examined analytically. A fracture mechanics model, developed initially to predict notched compressive strength, was applied to estimate the compression-after-impact strength of a stiffened panel; in the analysis the impact damage is r...
متن کاملBuckling strength of uniaxially compressed orthogonally stiffened plates
The bucking strength calculation includes the determination of global buckling strength, the effective plate width and the torsional buckling strength of open section stiffeners. In each calculation the classic strength formula should be modified considering the effect of initial imperfections and residual welding stresses. The calculation method of Det Norske Veritas design rules and the Euroc...
متن کاملEffect of Through Stationary Edge and Center Cracks on Static Buckling Strength of Thin Plates under Uniform Axial Compression
Thin plate structures are more widely used in many engineering applications as one of the structural members. Generally, buckling strength of thin shell structures is the ultimate load carrying capacity of these structures. The presence of cracks in a thin shell structure can considerably affect its load carrying capacity. Hence, in this work, static buckling strength of a thin square plate wit...
متن کاملBuckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression
Delamination is one of the most common failure modes in composite structures. In the case of in-plane compressional loading, delamination of a layered flat structure can cause a local buckling in delaminated area which subsequently affects the overall stiffness of the initial structure. This leads to an early failure of the overall structure. Moreover, with an increase in load, the delaminated ...
متن کاملAnalysis of Homogel Uniaxial Compression Strength on Bio Grouting Material
This study analyzed uniaxial compression strength over time by preparing a homogel specimen from a bio grouting material, a cement-like form produced by environment-friendly microbial reactions. Among chemical grouting methods, the most commonly used method is the Labile Waterglass method. In this study, the homogel uniaxial compressive strength of Labile Waterglass (LW) injection material and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Doboku Gakkai Ronbunshu
سال: 1988
ISSN: 0289-7806,1882-7187
DOI: 10.2208/jscej.1988.392_289