Statistical optimization of fibre reinforced polymer concrete made with recycled plastic aggregates by central composite design
نویسندگان
چکیده
To meet the present needs of concrete consumption, it is need hour to discover different alternatives and unique techniques. By Incorporating latest trends, Polymer Concrete (PC) Fibre-Reinforced Concrete (FRC) are being used improve strength concrete. It proposed produce M30 grade Fibre Reinforced (FRPC) with help Polyester Resins (PR), Polypropylene Fibres (PF) Recycled Waste Plastics (RWPA). FRPC a combination three variables replacement percentages, which requires extensive detailed experimentation optimize each variable in this investigation. In study (research), optimization was done by keeping two constant. reduce number experiments, ingredients statistical modelling technique Central Composite Design (CCD). conclusion, optimal input parameters for achieving 28-day CS determined be 12.05% PR, 2.19% PF, 30% RWPA. These findings based on analysis experimental results, modelling, CCD approach, demonstrating successful correlation between desired output.
منابع مشابه
Performance of High-strength Concrete Made with Recycled Ceramic Aggregates
Recent scientific concerns to achieve sustainability in construction have suggested the implementation of using recycled aggregate in concrete because it has the potential to reduce the demand for extraction of natural raw materials and decrease the volume of wastes landfilled. In this respect, this study aims to investigate the suitability of using ceramic tile (CT) and ceramic sanitary (CS) w...
متن کاملLife Cycle Assessment of Sustainable Concrete Made With Recycled Aggregates
The results of an environmental study on concrete manufacture that follows the standard protocol of life cycle assessment are shown in this document. The study has been done for seven types of concrete: one conventional and six containing cement kiln dust (10%), marble sludge (10%) and demolition waste (10%, 80% and 100%) respectively, in partial or total substitution of natural aggregate. Six ...
متن کاملDesign Optimization ofFiber Reinforced Plastic Composite Shapes
A global approximation method to optimize material architecture and cross-sectional area of new fiber reinforced plastic (FRP) composite beams is presented. The sections considered are intended for applications in short-span bridges. The beams are subjected to transverse loading, and the optimization constraints include deflection limit, material failure, and elastic buckling. Assuming a lamina...
متن کاملMachining of Fibre Reinforced Plastic Composite Materials
Fibre reinforced plastic composite materials are difficult to machine because of the anisotropy and inhomogeneity characterizing their microstructure and the abrasiveness of their reinforcement components. During machining, very rapid cutting tool wear development is experienced, and surface integrity damage is often produced in the machined parts. An accurate selection of the proper tool and m...
متن کاملHigh Performance Reinforced Concrete Beams made with Sandstone Reactive Aggregates
An investigation on the flexural behaviour of reinforced high performance concrete (HPC) has been conducted. Crushed sandstone known as reactive aggregate was used for both fine and coarse aggregates. In addition, mineral admixtures such as silica fume and fly ash combined with superplasticiser was used. The beams were made with concrete having compressive strength in the range of 74 88 N/mm 2 ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materia-rio De Janeiro
سال: 2023
ISSN: ['1517-7076']
DOI: https://doi.org/10.1590/1517-7076-rmat-2023-0182