STATISTICAL MODELING FOR ALUMINA LASER SINTERING

Modeling of selective laser sintering/selective laser melting

Selective laser sintering and selective laser melting are powder based additive manufacturing (AM) process that can rapidly manufacture parts with comparable mechanical properties to conventional manufacturing methods directly from digital files. However, the processing recipe development and design optimization of AM parts are often based on trial and error which erodes the benefit of AM. Mode...

Materials for Direct Metal Laser-sintering

Software Testbed for Selective Laser Sintering

Computer software plays an important role in the implementation of Solid Freeform Fabrication (SFF) technologies. This paper describes a software testbed for processing part geometry for a particular SFF technology, selective laser sintering (SLS), that is built around the separation of the slicing and rasterization operations to accommodate geometric information from a variety of sources. The ...

Laser Sintering Model for Composite Materials

A computer model for the sintering of ceramic/polymer composite materials has been established based on empirical sintering rate data. The model calculates sintering depths which result from variations in the operating parameters which include laser power, beam speed, scan spacing, scan vector length, and initial temperatures of the powder and surroundings. Sintering depths measured in multiple...

Sintering Behaviour of Waste Olivine and Olivine/Alumina Blends

The sintering behaviour of several green compacts made with olivine or olivine/alumina powder blends has been examined. To this goal, powders were attrition milled, uniaxially pressed into specimens and air sintered at temperatures ranging from 1100 to 1300 °C. The resulting samples were characterized by water absorption, shrinkage, phase composition and density. Compositions containing 5%, 10%...