Statistical Analysis of Dynamic Loads on Spur Gear Teeth : Experimental Study
نویسندگان
چکیده
منابع مشابه
Statistical Analysis of the Dynamic Mean Excitation for a Spur Gear
An innovative statistical methodology and generic expressions have been developed for the ratio of the dynamic mean excitation to the transmitted mean load under the influence of the important gear characteristics. Simple expressions have been established for identifying cases in which the dynamic mean excitation is more than, less than, or equal to the transmitted mean load. fDOI: 10.1115/1.18...
متن کاملNumerical and Experimental Investigation of Cold orBital Forging of a 16MnCr5 Alloy Spur Bevel Gear
The purpose of this research is to analyze the forging of bevel gears based on conventional forging method with material number 1.7131 with finite element method by means of SUPER FORGE software and to compare it with experimental cold orbital forging results.After doing simulation of conventional forging and obtaining press tonnage due to orbital forging method with DEFORM software, orbital fo...
متن کاملTorque Analysis of Magnetic Spur Gear with Different Configurations
This paper presents design and torque analysis in various types of magnetic gear with different magnetic materials and air gap. This type of gear offer both high speed and high torque required for drive applications. In the proposed gear analysis the low speed side is connected to prime mover and high speed side is connected to load, suitable for wind power, automobile applications and group dr...
متن کاملDynamic Model for the Stress and Strain State Analysis of a Spur Gear Transmission
A gear transmission dynamic model for the gear dynamic contact loading, dynamic contact stress state and dynamic contact strain state analysis is presented. A dynamic model of the transmission with four degrees of freedom is used. The transmission is analyzed using nonlinear finite elements contact formulation, using a novel software modules developed by the author used for the generalized anal...
متن کاملSpur Gear Tooth Stress Analysis And Stress Reduction
Gears are commonly used for transmitting power. They develop high stress concentration at the root and the point of contact. The repeated stressing on the fillets causes the fatigue failure of gear tooth. The main objective of this study is to add different shaped holes to reduce stress concentration. A finite element model of Spur gear with a segment of three teeth is considered for analysis a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of JSME
سال: 1977
ISSN: 0021-3764,1881-1426
DOI: 10.1299/jsme1958.20.1315