Static thermal stability of an autothermal reactor.

نویسندگان

چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Compact string reactor for autothermal hydrogen production

This study addresses the development of a compact reactor for oxidative steam-reforming of methanol (OSRM) to produce hydrogen in autothermal mode for fuel cells. The string reactor uses catalytically active brass wires with a diameter of 500 mm placed in parallel into a tube. The micro-channels in the reactor for gases are formed between the wires presenting hydrodynamics similar to the one in...

متن کامل

Micro-structured string-reactor for autothermal production of hydrogen

Novel micro-structured string-reactor designed as catalytically active wires placed in parallel into a tube was developed. The small diameter of the channels (∼100 m) leads to a short radial diffusion time, a narrow residence time distribution (RTD), and a low pressure drop. This reactor was applied for the oxidative steam-reforming of methanol (OSRM) to produce hydrogen in autothermal mode for...

متن کامل

Optimal Reactor Length of an Auto-Thermal Ammonia Synthesis Reactor

This paper presents the simulation of auto-thermal ammonia synthesis reactor. Our target here is to estimate the optimal reactor length which will give the maximum profit from the ammonia reactor. There are many literatures which are interested in ammonia simulation in the past but all need some corrections due to either uncorrected model used or uncorrected algorithm. We used here the ODE45 so...

متن کامل

Modeling and Simulation of an Autothermal Reformer

The steady–state operation of the autothermal reformer is simulated as two reactors in series by means of a detailed mathematical model. An input-output model is selected to describe the upper combustion chamber. The possible occurrence of homogeneous steam reforming and watergas-shift (WGS) reactions is considered. The catalyst bed is represented through a one-dimensional heterogeneous model, ...

متن کامل

Feasibility of Coupling Dehydrogenation of Ethylbenzene with Hydrogenation of Nitrobenzene in an Autothermal Catalytic Membrane Reactor: Modeling Study

The coupling of reactions in catalytic membrane reactors provides novel reactor configurations that allow shifting the thermodynamic equilibrium and yields of thermodynamically limited reactions and enhancing significantly the rate of production. An interesting pair to couple is the dehydrogenation of ethylbenzene to styrene and the hydrogenation of nitrobenzene to aniline. Hydrogen produced in...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

سال: 1978

ISSN: 0021-9592,1881-1299

DOI: 10.1252/jcej.11.40