Static Strain Aging of Microstructural Constituents in Transformation-Induced-Plasticity Steel
نویسندگان
چکیده
منابع مشابه
Static Strain Aging Behavior of Low Carbon Steel Drawn Wire
The static strain aging is a phenomenon that can change the mechanical properties of low carbon steels. Thus, the static strain aging behavior of low carbon steel wires after drawing process is studied. To do so, the wires are austenitized at different temperatures and cooled in different rates. Then the wires are drawn and aged at a specific temperature and time. Before and after aging of each...
متن کاملMicrostructural evolution and phase transformation in twinning-induced plasticity steel induced by high-pressure torsion
The microstructural evolution of twinning-induced plasticity steel during high-pressure torsion (HPT) processing at 573 K was systematically evaluated. Due to the high processing temperature, the formation of a homogeneous nanostructure was primarily dominated by complicated dislocation and grain boundary activities in lieu of deformation twinning. Apart from the grain refinement process, phase...
متن کاملstatic strain aging behavior of low carbon steel drawn wire
the static strain aging is a phenomenon that can change the mechanical properties of low carbon steels. thus, the static strain aging behavior of low carbon steel wires after drawing process is studied. to do so, the wires are austenitized at different temperatures and cooled in different rates. then the wires are drawn and aged at a specific temperature and time. before and after aging of each...
متن کاملInvestigation of Transformation Induced Plasticity in High Al–low Si TRIP Steel
This study was conducted in order to investigate the influence of plastic deformation on the transformation of retained austenite in a TRIP steel with a high content of Al and a low content of Si. To the aim, appropriate treatments were used to produce the starting material (TRIP steel). The microstructure of the obtained steel was composed of bainite and phases including ferrite and retained a...
متن کاملStrain-Induced Martensite Transformation Simulations during Cold Rolling of AISI 301 Austenitic Stainless Steel
Austenite is a semi-stable phase in most stainless steels that deforms to martensite under Md30 and forms martensitetype ά and ε due to the deformation in the steels. Since the distribution of strain induced martensite plays animportant role in achieving desired properties, the main objective of the present work is to model martensitedistribution of ά during cold rolling using...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions A
سال: 2008
ISSN: 1073-5623,1543-1940
DOI: 10.1007/s11661-008-9605-3